Honing Guide, BonyTek Stainless Steel Side Clamping Fixed Angle Honing Guide with Brass Roller for Wood Chisel, Planer, Blade, Graver, Flat Chisel Edge Sharpening, Clamping Width Range 0.32-3.22 Inch;

BonyTek Stainless Steel Side Clamping Fixed Angle Honing Guide with Brass Roller, Adjustable Clamping Width, Helpful for Your Wood Chisel, Planer, Blade, Graver, Flat Chisel Edge Sharpening!

Brass Roller Wheel With Open-End Retaining Ring Design
✪ Brass roller design, move back and forth without restriction during sharpening, keep the same direction, anti-slip, smooth and safe.
✪ Open-end retaining ring design, make sure that the rollers are not offset during sharpening, always stay centered.

Clamping Width Range
✪ You can adjust clamping width by rotating the screw-cap, clamping width range is from 0.32'' to 3.22'' [8-82mm].
✪ Support plane iron max clamping width to 82mm / 3.22 inch, Support chisel max clamping width to 58mm / 2.28 inch.

Fixed Angle, Easy To Use
✪ Turn the screw cap counterclockwise, clamp your chisel or other knife tools, move up and down to adjust freely blade angle.
✪ Then tighten the screw cap clockwise, blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth until your tools becomes sharper and more precise!

Great Partner to Help your Chisel Blade Edge Sharpening!
✪ Fit for wood chisel, planer, blade, graver, carving knife, plane iron, flat chisel edge sharpening.

Specifications
✤ Material: Stainless Steel+Brass
✤ Clamping Width Range: 8mm-82mm / 0.32''-3.22''
✤ Item Weight: 270g/ 9.52Oz
✤ Item Size: 9.7 x 4 x 4 cm / 3.82 x 1.57 x 1.57 inch (L*W*H)

Package
♣ 1x Chisel Honing Guide
♣ 1x Manual