Officially Licensed by AKK

FPV Camera:

Output Power: 0/25mW/50mW/200mW (switchable) (Set output power on 0, to avoid frequency interference) 

Input Power: 3.2-5.5V

Sensor: 1/3 ...

Buy Now From Amazon

Officially Licensed by AKK

FPV Camera:

Output Power: 0/25mW/50mW/200mW (switchable) (Set output power on 0, to avoid frequency interference) 

Input Power: 3.2-5.5V

Sensor: 1/3 "CMOS

Camera Resolution: 600TVLA

Angle: 120 ° FOV horizontal viewing angle 150 ° DFOV diagonal perspective

Mini illumination: 1 lux

Format: NTSC

Transmitter:

Support Video Format: NTSC 

Output Impedance: 50 Ohm

Output signal strength: 13±1dbmdBm

Output Power: 25mW: 14dBm /50mW: 17dBm /200mW: 23dBm

Wireless Channel: 40CH

Antenna: RHCP circular polarization clover leaf antenna

Antenna Size: 22x29mm

Operating voltage: 3.2V ~ 5.5V

Current consumption: 25mW: 250mA-510mA /50mW: 270mA-640mA /200mW: 330mA-740mA

Audio carrier: NO

Package Included: 

1 x AIO FPV Camera

1 x Cable

1 x User Manual



  • AIO FPV video camera+transmitter+antnenna combo ,rolled 3 functions in to one.Micro size, super light weight. weight:4.7g
  • 120 ° FOV horizontal viewing angle and 150 ° DFOV diagonal perspective.
  • Output power 25mW/50mW/200mW switchable, easy to change power/channel with button. compatible with 5.8GHz googles and monitor.
  • Nickel-plated 4 Leaf Antenna , RHCP circular polarization clover to prevent rust and get strong signal.Install in seconds, Plug and play, ready to fly, perfect for DIY
  • Requires 1S LiPo battery, power plug is JST1.25,the wire is JST1.25 to JST 2.0, signal range suitable for Ultra Micro RC Aircraft.
  • AIO FPV video camera+transmitter+antnenna combo ,rolled 3 functions in to one.Micro size, super light weight. weight:4.7g
  • 120 ° FOV horizontal viewing angle and 150 ° DFOV diagonal perspective.
  • Output power 25mW/50mW/200mW switchable, easy to change power/channel with button. compatible with 5.8GHz googles and monitor.
  • Nickel-plated 4 Leaf Antenna , RHCP circular polarization clover to prevent rust and get strong signal.Install in seconds, Plug and play, ready to fly, perfect for DIY
  • Requires 1S LiPo battery, power plug is JST1.25,the wire is JST1.25 to JST 2.0, signal range suitable for Ultra Micro RC Aircraft.

Similar Products

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter CameraCrazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber RingsWolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter DroneFrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 ConnectorFinware 10 Pair Amass XT30U (XT30 Upgrade) Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo BatteryiFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 (smaller) IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller (pack of 20pcs)6pcs GAONENG 260mAh HV 1S LiPo Battery 30C 3.8V LiHV for Tiny Whoop JST-PH 2.0 Powerwhoop mCPX Connector