Incorrect use of batteries and chargers may cause fire, explosion or damaged to the Crane. Please read the instructional manual carefully.*attention: please make sure the camera is properly mounted and balanced, otherwise the stabilizer may fail to start or operate normally, greatly affect the run time balance adjustment: (loosen the thumb screw on each axis first before adjusting)1.Level adjustment on tilt axis: hold the horizontal arm on the tilt axis with one hand and adjust the position of the camera to stay still.2.Balance adjustment on tilt axis and roll axis: adjust the tilt axis until camera can stay still with the lens facing up. Complete every step by tightening up thumb screw.3.Balance adjustment on an axis: adjust the pan axis until camera can stay still while keeping the vertical arm level when turned to the right/left side. Tighten up all thumb screws after completing adjustment. For the latest instruction, firmware upgrades and online calibration program, please download from: www.Zhiyun-tech/download_en/1*crane gimbal1*lens support bracket1*lens support screw1*camera mounting screw1* Micro USB cable1*user guide
- The zhiyun Crane V2 classical model is suitable for mirrorless camera and DSLR between 0.77 lb and 3.96 lb like Canon M series, Nikon J Series, Sony a7 and Panasonic Lumix.
- Built-in compact slip rings enable the Crane V2 gimbal to have all 3 axes 360 degrees unlimited rotation, which is controlled by joystick or gesture and powered by 3 x 32-Bit mcus.
- Smooth, steady and noiseless videos with app & wireless remote control, including applications such as time lapse, long exposure, low angle filming, etc.
- Balance your camera well on the 3-axis camera stabilizer at the initial position which just costs one minute. You can set the parameters such as follow speed and motor strength through “zy play” app (iOS/ Android).
- 2 types of battery adaptation provide max 12 hours Run-Time, one year Warranty offered, and promotion of stainless gimbal tripod is lasting.(Tripod optional)
- The zhiyun Crane V2 classical model is suitable for mirrorless camera and DSLR between 0.77 lb and 3.96 lb like Canon M series, Nikon J Series, Sony a7 and Panasonic Lumix.
- Built-in compact slip rings enable the Crane V2 gimbal to have all 3 axes 360 degrees unlimited rotation, which is controlled by joystick or gesture and powered by 3 x 32-Bit mcus.
- Smooth, steady and noiseless videos with app & wireless remote control, including applications such as time lapse, long exposure, low angle filming, etc.
- Balance your camera well on the 3-axis camera stabilizer at the initial position which just costs one minute. You can set the parameters such as follow speed and motor strength through “zy play” app (iOS/ Android).
- 2 types of battery adaptation provide max 12 hours Run-Time, one year Warranty offered, and promotion of stainless gimbal tripod is lasting.(Tripod optional)
