Description:100% Brand New and High quality.
Easy setup, All you need is a 20mm hole and the switch will sit in nicely; no more square cut outs.
Our switch comes with a kyhole slot to prevent unwanted rotation.
Functions:It can be applied as the switches for the additional electronical equipment inside or outside the car. (such as flashing lights, chassis lights, and dome lights).
Note:
AC 250V Current rerating for different loads
Inductive Load: 3.5A
Lamp Load: 1.8A
Motor Load: 2A
Capactive Load: 1.8A
AC125V Current rerating for different loads
Inductive Load: 5.25A
Lamp Load: 2.7A
Motor Load: 3A
Capactive Load: 2.7A
Very Important Notice:Ratings on the switch label are only for Purely Resistive AC load, for other types of loads please refer to the ratings above.DC load Current ratings are much lower than AC load,if you need to use this switch with more than 0.5A DC load,contact us for compatibility at first.
- 【Wide Application】Universal for Electromagnetic furnace, Water dispenser, buses, boats, marine, trailers，kitchen appliance etc.
- 【DIY As You Like】Black Boat Rocker Switch, 3 terminals ON/OFF/ON switch, , longer life for use.
- 【Product Basic Parameters】AC250V/10A 125V/15A; Size: 23mm x 23mm x 26mm(LxWxH)
- 【Attention】Select the appropriate soldering iron to speed up the soldering. It is recommended to use 20W soldering iron to complete the soldering within 3 seconds. The flux must be in proper amount. When soldering, try to turn the switch pin down.
- 【Parcel contains】1x Rocker Switch Easy to install and durable.With our strict quality control system, we test each item and ensure in good condition before we ship.
- 【Wide Application】Universal for Electromagnetic furnace, Water dispenser, buses, boats, marine, trailers，kitchen appliance etc.
- 【DIY As You Like】Black Boat Rocker Switch, 3 terminals ON/OFF/ON switch, , longer life for use.
- 【Product Basic Parameters】AC250V/10A 125V/15A; Size: 23mm x 23mm x 26mm(LxWxH)
- 【Attention】Select the appropriate soldering iron to speed up the soldering. It is recommended to use 20W soldering iron to complete the soldering within 3 seconds. The flux must be in proper amount. When soldering, try to turn the switch pin down.
- 【Parcel contains】1x Rocker Switch Easy to install and durable.With our strict quality control system, we test each item and ensure in good condition before we ship.
