Approximate Dimensions: 6 5/8" x 2 1/2" x 2 3/4" (Width x Height x Depth) measured at normal mounting position including housing. Fitment: Yamaha YZF R6 2003-2005 Yamaha YZF R6S 2006-2008.
Wire Diagram (by color): 1. Black = Ground Wire 2. Red = Brake Light 3. White = Running Light 4. Yellow = Right Turn Signal 5. Blue = Left Turn Signal NOTE: The BLACK(ground wire), RED(break light) and WHITE(running light) wires must be inserted into the (white) wire clip provided and plugged into motorcycle wire clip.
- Enhance the look with these EURO LED Tail Light with Turn Signals (you can remove your rear turn signals) Laser weld finished; not glued Direct bolt on.
- Easy installation, no modification required Condition: Brand New Quantity: 1 Lense Color: Like the picture show.
- Approximate Dimensions: 6 5/8" x 2 1/2" x 2 3/4" (Width x Height x Depth) measured at normal mounting position including housing. Fitment: Yamaha YZF R6 2003-2005 Yamaha YZF R6S 2006-2008.
- Wire Diagram (by color): 1. Black = Ground Wire 2. Red = Brake Light 3. White = Running Light 4. Yellow = Right Turn Signal 5. Blue = Left Turn Signal NOTE: The BLACK(ground wire), RED(break light) and WHITE(running light) wires must be inserted into the (white) wire clip provided and plugged into motorcycle wire clip.
- Please be sure to place the wire in the correct slots; based on the setup of the motorcycle.
- Enhance the look with these EURO LED Tail Light with Turn Signals (you can remove your rear turn signals) Laser weld finished; not glued Direct bolt on.
- Easy installation, no modification required Condition: Brand New Quantity: 1 Lense Color: Like the picture show.
- Approximate Dimensions: 6 5/8" x 2 1/2" x 2 3/4" (Width x Height x Depth) measured at normal mounting position including housing. Fitment: Yamaha YZF R6 2003-2005 Yamaha YZF R6S 2006-2008.
- Wire Diagram (by color): 1. Black = Ground Wire 2. Red = Brake Light 3. White = Running Light 4. Yellow = Right Turn Signal 5. Blue = Left Turn Signal NOTE: The BLACK(ground wire), RED(break light) and WHITE(running light) wires must be inserted into the (white) wire clip provided and plugged into motorcycle wire clip.
- Please be sure to place the wire in the correct slots; based on the setup of the motorcycle.
