300A Continuous Duty Solenoid Relay Nickel-Plating For Golf Carts ,Winch, Marine 12V
Specifications:
- Mount Type: 2 HOLE MOUNT FLANGE
- Insulated Base with steel hosuing
- Copper Contact Terminals
- Circuitry: Single Pole Single Throw (SPST)
REPLACES:
- DELCO 1114208, 1114218
- JOHNSON ELECTRIC 5117340
- MOTORCRAFT SWX88
- PRESTOLITE 15-88, SWX-88, 15-132, SAS4202, 15-108
- YALE 502265300
Application:
THIS SOLENOID IS FOR GOLF CART AND INDUSTRIAL APPLICATIONS WHERE THE SOLENOID IS BEING ENGAGED FOR LONG PERIODS OF TIME
- Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT
- Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight;Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
- Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining
- Max Transient current can be 300A, but Continuous Working Current recommend under 100 Amp
- Note: It is a starter solenoid, work in the process of started. recommend hold time is 5 minutes, must need a cool rest time for the next start. /If u need a long working one, pls note us.
- Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT
- Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight;Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
- Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining
- Max Transient current can be 300A, but Continuous Working Current recommend under 100 Amp
- Note: It is a starter solenoid, work in the process of started. recommend hold time is 5 minutes, must need a cool rest time for the next start. /If u need a long working one, pls note us.