Dual Control X Type Tail Light with 8 WS2812B LEDS and Loud Buzzer Controller by Flight Controller or Transmitter

Features and Specification:
Dual Control: FC control andamp; TX control
TX mode:...

Buy Now From Amazon

Dual Control X Type Tail Light with 8 WS2812B LEDS and Loud Buzzer Controller by Flight Controller or Transmitter

Features and Specification:
Dual Control: FC control andamp; TX control
TX mode: LED 7 colors(White, Red, Green, Blue, Yellow, Magenta, Cyan)
LED 4 status(Constant light, Slw blink, Fast blick, Voilent blink)
Buzzer: Lost Plane Finder
FC Mode: support Naze32, SPracing F3,etc. with Cleanflight or Betaflight firmware
Input voltage range: 4.5-5.2V DC
Power of TX mdoe(5V IN):1W/0.2A-2W/0.4A
Size andamp; mounting: Pls check the layout
Weight: 5g About the FPV Sponge Mat Landing Skid Pad Gear:

1. Super light, strengthen shockproof,anti-static.
2. Height:10mm, width:15mm,length:30mm,color:black
3. Resure stable structure and avoid scratch for multicopter flight
4. Soften the airframe during touch downs, guarantee better than aluminum column landing gear.
5 .Great for mini quads from 180mm to 300mm in size, great replacement pads for quadcopters like QAV210 QAV250 QAV-R 180 220 260


Package:
1pc * Dual Control Loud Buzzer X Type Tail Light with 8 WS2812B LEDS and Loud Buzzer Controller by Flight Controller or Transmitter
4pcs * Sponge Mat Landing Pad Gear


  • The tail lgiht is specially designed for X desing frame, with 8 * WS2812B LEDS Loud Buzzer. Dual Control: FC(flight controller) control TX(transmitter) control.
  • FC Mode ------- support Naze32, SPracing F3,etc. with Cleanflight or Betaflight firmware.
  • TX mode ------ LED 7 colors(White, Red, Green, Blue, Yellow, Magenta, Cyan),LED 4 status(Constant light, Slw blink, Fast blick, Voilent blink),Buzzer: Lost Plane Finder
  • Protecting our drone with Sponge Mat Landing Pad Gear ------ Super light, strengthen shockproof,anti-static.Resure stable structure and avoid scratch for multicopter flight
  • The Sponge Mat Landing Pad Gear is suitable for most drone ------ Great for mini quads from 180mm to 300mm in size, great replacement pads for quadcopters like QAV210 QAV250 QAV-R 180 220 260 Martain II and so on.
  • The tail lgiht is specially designed for X desing frame, with 8 * WS2812B LEDS Loud Buzzer. Dual Control: FC(flight controller) control TX(transmitter) control.
  • FC Mode ------- support Naze32, SPracing F3,etc. with Cleanflight or Betaflight firmware.
  • TX mode ------ LED 7 colors(White, Red, Green, Blue, Yellow, Magenta, Cyan),LED 4 status(Constant light, Slw blink, Fast blick, Voilent blink),Buzzer: Lost Plane Finder
  • Protecting our drone with Sponge Mat Landing Pad Gear ------ Super light, strengthen shockproof,anti-static.Resure stable structure and avoid scratch for multicopter flight
  • The Sponge Mat Landing Pad Gear is suitable for most drone ------ Great for mini quads from 180mm to 300mm in size, great replacement pads for quadcopters like QAV210 QAV250 QAV-R 180 220 260 Martain II and so on.

Similar Products

iFlight 150mm 2.4G Receiver Antenna Generation 4 RF113 (smaller) IPEX Port for Latest FrSky X4R-SB Receiver and Remote Controller (pack of 20pcs)M3 Flight Controller Anti-Vibration Fixed Screws Mounting Hardware Standoffs Spacer for Naze32 CC3D F3 F4 Flight ControllerAKK FX2 5.8Ghz FPV Transmitter 25mW/200mW/500mW/800mW VTX with MMCX Support OSD Configuring via Betaflight Flight Control BoardFrSky XSR 2.4GHz 16CH ACCST Receiver S-Bus CPPM Output Support X9D X9E X9DP X12SReadytosky 220mm FPV Racing Drone Frame for Martian II Carbon Fiber Quadcopter Frame Kit 4mm Arms with Power Distribution Board(5030 propellers,battery strap)iFlight 40pcs M3 Anti Vibration Rubber Damper Balls For FPV F4 F7 Flight Controller Soft Mount Shock Absorption BallsHOBBYMATE M3 Nylon Standoffs 4mm for FPV Drone Quadcopter Building PC PCB Motherboard StandoffsNIDICI 12pcs M3 Anti-Vibration Fixed Screws Mounting Hardware Spacer Rubber Standoffs for FPV Racer Copter F3 F4 Flight Controller