This LCD Monitor can be connected with your video equipment like VCD, DVD, GPS, satellite receiver, etc.
It is very easy to install. It is a key part of a rear view system that will definitely enhance your driving safety.
After installation, this monitor system will start up automatically whenever you back your car up.
Note: you can't switch the two video inputs manually. There is no image shown if there is no video input signal.
Installation:
The monitor can be fixed on either the windshield or dash.
Choose a suitable location in your vehicle that will not block your view.
Clean the mounting area you've chosen with a quality glass cleaner or alcohol to remove any dirt or residue.
Peel off the protective film from the adhesive mounting pad on the bottom of the monitor bracket and then affix the pad to the desired location.
(NB: Once put in place, the mounting pad cannot be easily removed. Therefore, before mounting, please be sure of your desired location.)
Connect the power cable to the monitor cable, and connect the monitor with a camera
Conceal the monitor cable behind the windshield trim piece and then continue along under the head liner to the rear of the vehicle.
Package:
1 * 5" HD Car TFT LCD Monitor
1 * Power Cable
1 * User Manual
- 5Inch AHD TFT Screen Monitor---Provide better clarity for AHD backup cameras, show better image than other monitors, higher brightness and resolution than other monitors, support both AHD and CVBS video signal format cameras
- Two Video Inputs Car Display---You can connect it with two cameras(front and rear). Yellow plug must be connected to rear view camera. Perfect companion for a RCA backup camera, video equipment like VCD, DVD, GPS, satellite receiver, etc
- Car Rear View Monitor with More Functions---PIC: adjust monitor Brightness, Contrast, Saturation, Tint. CAR: Parking Line on/off. MODE: rotate the image to meet your need. SET: Language selection and others
- Monitor with Two Brackets for Different Installation---One for dashboard mounting, you can fix it on a flat position where you think convenient. The other for windshield mounting, you can choose a suitable location on the windshield to fix it
- How This AHD Backup Screen Monitor Works---When connecting to power supply, it shows blue screen if no video signal input, after several seconds, the screen will turn off automatically. It displays yellow connector video signal by priority(usually for backup camera), if you need to see the other video input image, please long press button “-”
- 5Inch AHD TFT Screen Monitor---Provide better clarity for AHD backup cameras, show better image than other monitors, higher brightness and resolution than other monitors, support both AHD and CVBS video signal format cameras
- Two Video Inputs Car Display---You can connect it with two cameras(front and rear). Yellow plug must be connected to rear view camera. Perfect companion for a RCA backup camera, video equipment like VCD, DVD, GPS, satellite receiver, etc
- Car Rear View Monitor with More Functions---PIC: adjust monitor Brightness, Contrast, Saturation, Tint. CAR: Parking Line on/off. MODE: rotate the image to meet your need. SET: Language selection and others
- Monitor with Two Brackets for Different Installation---One for dashboard mounting, you can fix it on a flat position where you think convenient. The other for windshield mounting, you can choose a suitable location on the windshield to fix it
- How This AHD Backup Screen Monitor Works---When connecting to power supply, it shows blue screen if no video signal input, after several seconds, the screen will turn off automatically. It displays yellow connector video signal by priority(usually for backup camera), if you need to see the other video input image, please long press button “-”
