Full Set 60W Adjustable Temperature ON/OFF Switch Welding Soldering Iron Kit with Solder Sucker,Desoldering Wick, Solder Wire, Anti-static Tweezers and Stand with Cleaning Sponge;

· Specification:
Working Voltage: AC 110V/60Hz
Power: 60 w
Temperature Range: 200-450?- (392-842?)
Tips Model: 900M Series
Solder Wire: 60% Sn, 38% Pb, 2.0% Flux
Solder Wire Diameter: 0.039 inch
Solder Wire Weight: 0.38 oz

8-IN-1 FULL KIT
Adjustable temperature electronic soldering iron*1, Solder wick*1, Solder wire*1, Soldering sucker (desoldering pump)*1, 5 Solder tips*1, Anti-static tweezers*2, Cleaning sponge*1, Carrying Case*1.

· How to use soldering iron?
1. Heat up the soldering iron.
2. After the soldering iron is fully heated, use a wet sponge to softly scrape it to remove old solder.
3. Wait a few seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start.
4. When soldering two components together, place the soldering iron on the area where you want to touch, hold it there for a second.
5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need.
6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint.
7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.

· Note:

- Ensure the power cord is in good condition and the welding head is not loose before soldering.
- For prolonging service life, please switch to the 200? model when not using it temporarily and don't let the soldering iron stay at high temperature all the time.