Package include:
4 x 23HS2430B Nema23 stepper motor 425oz-in 112mm 3A (Dual Shaft)
4 x FMD2740C stepper motor driver
1 x 400W 36V/9.7A switching power supply
1 x 4 Axis USBCNC breakout board
1 x Hand controller
1 x USB Cable
CD include with English user manual and software and register code
This cnc kit only support USB CNC Software,not support Mach3 Softare,when install the software need the right register key to run pls contact for it!
1. USBCNC breakout board
USBCNCV4.0 is a high performance motion controller which based on PC software USBCNC control
Computer system requirement
Minimum configuration:
1) CPU:1GHz
2) Memory: 512MB
3) 500MB free disk space
2. FMD2740C stepper motor driver
2,Features
1. Power supply voltage 12 to 40VDC
2. Subdivision precision 2\8\16\32\64\128\10\20 optional
3.Maximum drive current is 4A
4.Drive any 4A phase current of 2-phase or 4-phase hybrid stepping motor
Applications
Suitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, SMT machine, etc.
3. Nema23 Stepper Motor
General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length;back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)
4.Switching power supply
400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:36v/9.7 A,single output switching power supply
