9006 HB4 LED Headlight Bulbs 12000LM 120W 6000K Cool White Conversion Kit - Low Beam/High Beam/Fog Light - Plug & Play All-in-One 2 Yr Warranty (Pair);

Specifications:
Compatible With: 9006/HB4/9012
Color Temperature: 6000K White
Lamp Voltage: DC 12V-24V
Beam Type: Single Beam, for just high beam or just low beam or just fog light
Beam Angle: 360 Degrees
Operating Temperature: -40°C ~ +80°C
IP Rate: IP65
Application: Fits High Beam or Low Beam
Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
DO NOT Need additional Parts or Modification. 100% Integrated Design, Plug and Play.
(Few vehicles may require load resistors to stop flickering or fix error message)

Package include:
2x LED Headlight Bulbs ( Built-in Driver Ballast )

Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Quick Answers:
Q:What should I do if one side could not work?
A: 1)Please turn around the plug (swap the polarity) of the defective bulb and try again
2)Please exchange the bulbs from side to side and see if the problem could be solved
3)Please check your connection and fuse
4)If it still could not be resolved, please click "Dicn" to contact our customer service, we will get back to you within 24 working hours