Simply select the appropriate sized ferrule terminal for your sized wire. Then hold the tool so that the back (wire side) is facing you. Squeeze tool handles together and allow them to open fully. Place a provided terminal in the proper crimping chamber - the wire barrel should be at the back of the tool. Hold the terminal in position, and squeeze the tool handles together until ratchet engages just enough to hold the terminal - DO NOT deform the wire barrel at this point. Finally, insert the stripped wire into the open end of the crimp connect and hold the wire in place, squeeze the tool handles together until the ratchet releases. Allow the tool handles to open, and remove the crimped terminal. Inspect the terminal crimp.
Box content: Capacity
0,50 [square mm] white; A.W.G.: #22; max current: 4.5A-125 pcs
0,75 [square mm] blue; A.W.G.: #20 ; max current: 6.75A-125 pcs
1,00 [square mm] red; A.W.G.: #18; max current: 15A-125 pcs
1,50 [square mm] black; A.W.G.: #16; max current: 19A-125 pcs
2,50 [square mm] grey; A.W.G.: #14; max current: 27A-125 pcs
4,00 [square mm] orange; A.W.G.: #12; max current: 35A-125 pcs
6,00 [square mm] green; A.W.G.: #10; max current: 45A-125 pcs
10,00 [square mm] yellow; A.W.G.: #7; max current: 65A-125pcs
