PARTS COMPATIBILITY:
Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.
(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).
The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.
It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.
- Specs - Maximum Pressure: 2600 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Short Shaft. Bolt Pattern: 2 5/8" Center to Center & 1 7/8" Center to Each Outer Hole. Maximum Horsepower: 6.5 GHP. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Oil Capacity: 75 mls (2.5 oz). Refer to images 2 and 3 for more information
- Includes - (1) Horizontal Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, Oil Cap, (1) Keyway, (1) 3/8" MPT Quick-Connect Socket, (4) Hex Bolts & (4) Washers; comes as shown in the first image
- This pump mounts horizontal (oil cap points up). Pump needs at least 5HP to handle PSI. Pump head cannot be flipped. Thermal relief valve comes pre-installed. Brass outlet tube MUST be removed if quick-connect is being used
- Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
- Specs - Maximum Pressure: 2600 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Short Shaft. Bolt Pattern: 2 5/8" Center to Center & 1 7/8" Center to Each Outer Hole. Maximum Horsepower: 6.5 GHP. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Oil Capacity: 75 mls (2.5 oz). Refer to images 2 and 3 for more information
- Includes - (1) Horizontal Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, Oil Cap, (1) Keyway, (1) 3/8" MPT Quick-Connect Socket, (4) Hex Bolts & (4) Washers; comes as shown in the first image
- This pump mounts horizontal (oil cap points up). Pump needs at least 5HP to handle PSI. Pump head cannot be flipped. Thermal relief valve comes pre-installed. Brass outlet tube MUST be removed if quick-connect is being used
- Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
