Brand: RioRand
Product Specifications:
Applicable voltage range: DC 7-70V (70V is the maximum operating voltage please leave margin while using)
Drive current: Maximum 30A(Current need to reduce relatively while working voltage is high)
Control power: 12V within 300W ; 24V within 400W ; 48V within 450W ; 72V within 500W
Duty cycle adjustable range: about 1% -100%
PWM frequency: 12KHZ
Note:
This product is DC brush motor speed controller, can not access AC power and drive brushless motor.
If there is any puzzle,please CONTACT US and we will solve it!
- Wide voltage 7-70V high current 30A design for a wide range of applications, on-board switch with run stop brake function, adjust the potentiometer soft line can be separated, wire length 15CM.
- Circuit for optimized design, duty cycle adjustment range is wide, adjust the motor smooth without bath sound No vibration, with power indication, the circuit design is stable and suitable for long time work.
- This product is a DC brush motor speed controller, need a separate DC power supply to the governor/controller power supply can not be connected to AC power can not drive brushless motor.
- Before wiring power, please read the wiring label, the input is DC power positive and negative poles can not be engaged, the output is connected to the motor (motor) does not need to be divided into positive and negative, if the direction of operation is not right, please replace the motor of the two wires.
- On the voltage or current regulation, adjust the duty cycle is in the unit time to control the on-off time, the output is a pulse, no-load with a voltmeter to measure the output voltage and input close to the motor connected to change the duty cycle added to the motor on both sides of the average voltage changes to achieve speed regulation, the voltage changes in the current of course followed by changes. The role of the current, and the current is derived from the change in voltage.
- Wide voltage 7-70V high current 30A design for a wide range of applications, on-board switch with run stop brake function, adjust the potentiometer soft line can be separated, wire length 15CM.
- Circuit for optimized design, duty cycle adjustment range is wide, adjust the motor smooth without bath sound No vibration, with power indication, the circuit design is stable and suitable for long time work.
- This product is a DC brush motor speed controller, need a separate DC power supply to the governor/controller power supply can not be connected to AC power can not drive brushless motor.
- Before wiring power, please read the wiring label, the input is DC power positive and negative poles can not be engaged, the output is connected to the motor (motor) does not need to be divided into positive and negative, if the direction of operation is not right, please replace the motor of the two wires.
- On the voltage or current regulation, adjust the duty cycle is in the unit time to control the on-off time, the output is a pulse, no-load with a voltmeter to measure the output voltage and input close to the motor connected to change the duty cycle added to the motor on both sides of the average voltage changes to achieve speed regulation, the voltage changes in the current of course followed by changes. The role of the current, and the current is derived from the change in voltage.
