H11 H8 H9 LED Headlight Bulbs 12000LM 120W DRL Conversion Kit for Fog Light/Low Beam/High Beam 6000K Cool White COB Chips Super Bright Plug & Play - 2 Yr Warranty (Pair);

Specification:
Compatible With: H8 H9 H11
Color: 6000K(Cool White Color)
Lamp Voltage: 12V-24V
Beam Type: Single Beam, for just high beam or just low beam or just fog light
Beam Angle: 360 Degrees
Operating Temperature: -40°C ~ +80°C

Install Caution:
1.As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2.Put the vehicle into park or make sure it is securely in gear.
3.Make sure to have the ignition turned off and the keys removed.
4.Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5.Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6.Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7.Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package include:
2 x LED Headlight Bulbs (Built-in Driver Ballast)

Note:
Few vehicles may require load resistors to stop flickering or fix error message
Please check out the bulb type before purchase.

Quick Answers:
Q: Why the bulbs is loss and it could not fit? (H8/H9/H11/9005)
A:Please put the bulb in the bulb assembly, and make sure to rotate the bulbs in the socket by clockwise. In this way the bulbs could be fitted.

Q: Why both sides could not work?
A: Please turn around the plug (swap the polarity) and try again.

Q: Why both sides flicker/interference/error light?
A: You vehicle may need a resistor Cancelers Decoder. You could click "Dicn" to contact our customer service for help.