4 Inch OD Self Cleaning No Clog Aluminum Blast Gate Cut Off Valve for Dust Collection System ABG4;
4 Inch OD Self Cleaning No Clog Aluminum Blast Gate Cut Off Valve for Dust Collection System ABG4

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. ...

Buy Now From Amazon

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. Outer case made from cast aluminum with sliding steel gate and locking knob. Typical gate allow debris to accumulate in the groove preventing the gate from closing fully, causing leaking and reducing suction. The slot on these units extends through the back of the base to allow debris to be pushed out of the groove and prevent buildup.

  • Will fit 4" diameter hose or ducts
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts
  • Open slot at back to for self-cleaning, no-clog operation
  • Cast aluminum, steel sliding gate, locking knob
  • Will fit 4" diameter hose or ducts
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts
  • Open slot at back to for self-cleaning, no-clog operation
  • Cast aluminum, steel sliding gate, locking knob

Similar Products

POWERTEC 70106 4-Inch Y-Fitting Dust Hose ConnectorPOWERTEC 70149 Dust Control Flex Cuff with Hose Clamps, 4-Inch6POWERTEC 70143 PVC Dust Collection Hose (4 Inch x 20 Feet) | Flexible Clear Vue Heavy Duty PVC HosePOWERTEC 70190 Y-Fitting, 4 x 2-1/2POWERTEC 70134 2-1/2-Inch Aluminum Blast Gate for Vacuum/Dust CollectorPOWERTEC 70136 4-Inch to 2-1/2-Inch Cone ReducerPOWERTEC 70101 4-Inch Wire Hose Clamp, 5-Pack