Feature
Sticker is Carbon Fiber and can withstand outdoor weather. Car graphics for both sides.The graphics for the car is very cool and special.Image is not of actual scale.Please view the size above for actual size.Colors may be different depending on the computer moniter's resolution.Directions: Ensure that the surface that you are applying the sticker to is dry and clean.
Installation:(refer to fig 04)
Tools: watering can, soapy water, clean rag, scraper, blow dryer
Step01: Clean the car surface, spurt soapy water onto installation location(for reducing the viscosity and convenient for adjusting, soapy water can help avoiding bubbles during installation)
Step02: Put the car sticker onto installation location and get rid of the car sticker holder
Step03: Adjust the car sticker to the right position
Step04: Use a scraper to scrape the surface of car sticker until there is no bubble
Step05: Get rid of the transfer film
Step06: If there is still bubbles, use a needle to release the air inside bubble, and make the surface plain
Step07: Make the innerside of car sticker as dry as possible, could use a blow dryer
Note:
Do not put the car under hot sun in 48 hours
Do not wash the car in 48 hours
Do not install the decals in the very cold surrounding
Never use the blow dryer to dry it before get rid of the transfer film
Feature
Sticker is Carbon Fiber and can withstand outdoor weather. Car graphics for both sides.The graphics for the car is very cool and special.Image is not of actual scale.Please view the size above for actua...
Similar Products
