Seco-Larm SD-991A-D1Q Enforcer Mini No-Cut Electric Door Strike, Fail-Secure;

The Seco-Larm Enforcer Mini No-Cut Electric Door Strike (Fail-Secure) is used to convert a cylindrical lockset into an electronic access-controlled locking system. This "no-cut" model is specially designed to fit most metal or wooden doors with only minimal cutting required of the door frame beyond the hole for the strike. Installation is further simplified by the strike's 2-wire, non-polarized connection to your access control or egress device, as well as its reversible non-handed design to fit either right- or left-handed doors. FEATURES: Provides 1,000-pound holding force/static strength. Uses 2-wire, non-polarized connection to access control or egress device. Stainless steel keeper for strength and long life. Powered by a solenoid, not a buzzer coil (12VDC). DETAILS: The door strike includes both a stainless steel no-cut strike plate and a silver-colored aluminum low-cut strike plate to accommodate almost any cylindrical door locking system. (An alternative bronze-colored aluminum low-cut strike plate is optionally available, sold separately - SD-991RA-61Q/B). All required installation hardware is included. The strike connects to digital keypads, pushbutton switches, and other entry devices, and it features shallow design to support use with most metal doors. It offers fail-secure operation, so when power is lost, the strike locks the door. CONTENTS: Door Strike, Stainless Steel No-Cut Strike Plate (SD-991SS-61Q/S), Silver Low-Cut Strike Plate (SD-991RA-61Q/A), (2) Mounting Screws, (2) Splice Connectors, (2) Strike Plate Screws, Mounting Template, Manual. NOTE: Indoor use only. SPECS: Manufacturer Part Number: SD-991A-D1Q. Operating Voltage: 12VDC. Current Draw: 280mA at 12VDC. Holding Force: 1,000 lbs (454kg). Endurance: 250,000 Cycles (Factory tested). Latch Throw: 1/2-inch (13mm). Operating Humidity: 0 to 85 percent (non-condensing). Operating Temperature: 14F to 120F (-10C to 49C). Approvals: CE, RoHS. Warranty: 1 Year.