RioRand 1203BB DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Control the forward or reverse direction and the stop of DC motor by switch.
Operating instruction:
Before you're attempting to wire the controller, make sure that power is off.
1. Connect wires refer to the “wiring diagram" (NO.6 picture).
2. Turn on the power, and adjust the potentiometer.
3. The LED indicates the power up and the speed of motor.
Warning: Do not reverse positive and negative power loads. This will damage the controller!
Package Including:
1 x RioRand DC Motor Speed Controller
- PWM DC Motor Speed Controllers：the input power range is DC 6-28V; the maximum continuous output current: 3A（Maximum load current: 3A, never exceed 3A）; the maximum output power: 80W.
- The DC motor speed controller must be connected to a DC power source. Do not connect directly to a 220V AC household power supply.
- Low-voltage reduction motor forward and reverse switch control.Potentiometer with switch function. Switch cable length: 15 cm/5.9 inches. Made of ultra-soft, high-temperature resistant silicone rubber wire.
- This is a Low voltage brushed DC controller, Please use within the permitted range.This is just a DC motor controller, a small PWM low-voltage reduction motor with a forward/reverse speed control switch.
- Item size: about 3.2*5*1.5 cm/1.3*2*0.4 inches; net weight: about 1.13 ounces.Package: 1 x RioRand DC motor speed controller.
- This is a speed controller, not a voltage regulator. It is a DC speed controller. If you are unsure how to operate it, please consider carefully before purchasing.
- PWM DC Motor Speed Controllers：the input power range is DC 6-28V; the maximum continuous output current: 3A（Maximum load current: 3A, never exceed 3A）; the maximum output power: 80W.
- The DC motor speed controller must be connected to a DC power source. Do not connect directly to a 220V AC household power supply.
- Low-voltage reduction motor forward and reverse switch control.Potentiometer with switch function. Switch cable length: 15 cm/5.9 inches. Made of ultra-soft, high-temperature resistant silicone rubber wire.
- This is a Low voltage brushed DC controller, Please use within the permitted range.This is just a DC motor controller, a small PWM low-voltage reduction motor with a forward/reverse speed control switch.
- Item size: about 3.2*5*1.5 cm/1.3*2*0.4 inches; net weight: about 1.13 ounces.Package: 1 x RioRand DC motor speed controller.
- This is a speed controller, not a voltage regulator. It is a DC speed controller. If you are unsure how to operate it, please consider carefully before purchasing.
