VViViD Do-It-Yourself Automotive Rim Repair and Protection Kit;

Permanently restore your rims to better-than-new condition with the VVIVID rim repair kit the kit contains everything you need to repair scratches, dents, installation damage, curb damage or scuff marks on your wheels and rims, whether they are alloy, synthetic or steel. The repaired spots will be vibration resistant, carwash resistant and able to handle temperatures in excess of 260 degrees you can ever fix hubcaps included in this kit is everything you need to fix virtually any damage in no time: 1 tube of repair adhesive 1 bottle silver-grey alloy paint (vibration-resistant) 2 latex gloves 1 sandpaper pad (grit:1000) 1 sandpaper pad (grit:400) 1 microfiber cleaning cloth 2 plastic applicator spatulas 2 alcohol wipe pads directions 1.Clean the damaged alloy wheel with soap and water and remove rough edges and unevenness's around the damaged area with sandpaper. 2. Mixing the repair adhesive: Press out the needed mass of repair adhesive onto a mat or similarly solid, disposable surface. Mix both components to a consistent grey mass with spatula provided. This process should take 2-4 minutes. 3. Fill the damaged portion of the rim with the mixed mass. Ensure the mass overflows the damaged area. Allow dry for a minimum of 15 min, up to an hour for larger applications. 4. Accommodation the outlines: Use wet sandpaper to mold and flatten the outlines of the repaired surface. If necessary, please repeat step 2 again. 5. Clean the repair area and apply a thin layer of silver alloy paint by brush or with spatula. Paint should dry at least 1-2 hours before using the car and full cure time is 3 days. (Warning: Flammable. Avoid breathing harmful vapors. Use only in well-ventilated area. Skin and eye irritant wash skin thoroughly with soap and water immediately. In case of eye contact, flush with water for 15 minutes. If irritation, consult a doctor. Keep out of reach of children).