Specifications:
Rated Power:120W
Inlet/Outlet:3/4"
Max Flow:30L/min(8GPM)
Rated Head: 9m(29.5FT)
Volt/Freq:110-120V/60Hz
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning,boilers, solar circulating water, hot water circulating warm and so on.
Advantages:
No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.
Features:
High temperature resistance, antifraying,long life, full-automatic,maintenance-free, super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages. Built-in high sensitive electronic sensors,the water will be flow when we open the switch.
Performance Datas:
1). Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range is 0℃ - 100℃(0-212℉)， Maximum working pressure is 10bar.
3).Ambient temperature: not higher than 40℃（104℉）.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron, PP, ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 160 mm.
- 1.Specific: Voltage: 110V/60Hz; Max Flow: 30L/min(8GPM);Max Head:12m(39.4FT);Inlet/Outlet: NPT 3/4’’
- 2.Wide application:It can be used to supply water and add pressure for mansions of city, villa of suburb, house, to match with insdustrial equipment, to supply water in cycle for cooling air-condition, boiler and solar energy, supply hot water and keep warm in cycle, it can add pressure for water faucet, shower head, toliet, water heater, solar heater, water tank,pipe, etc.
- 3.Features: The pump is treated with special anti-rust treatment, high temperature resistance, corrosion resistance, anti-fraying,long life,no rust. No leakage, low noise, environmental protection, beautiful appearance, convenient installation, run responsible and so on.
- 4.Material: The pump is equipped with a cast iron pump head, aluminum motor shell, PE impeller, ceramic bearings
- 5.Forbidden Fluid: Dangerous liquid which contains solid particles, fibre or oil stains is not allowed. Explosive, mucous or corrosive liquid is forbidden. Fluid temperature range: 0-100℃(0-212℉);Ambient Temperature: Permissible up to 40℃(104℉)
- 6. Note: A minimum inlet flow rate of 0.26 GPM is required to ensure automatic starting.
- 7. Note: The pump is booster and circulator pump, Set the button to auto, the pump is booster pump; Set the button to manual, the pump is circulator pump.
- 1.Specific: Voltage: 110V/60Hz; Max Flow: 30L/min(8GPM);Max Head:12m(39.4FT);Inlet/Outlet: NPT 3/4’’
- 2.Wide application:It can be used to supply water and add pressure for mansions of city, villa of suburb, house, to match with insdustrial equipment, to supply water in cycle for cooling air-condition, boiler and solar energy, supply hot water and keep warm in cycle, it can add pressure for water faucet, shower head, toliet, water heater, solar heater, water tank,pipe, etc.
- 3.Features: The pump is treated with special anti-rust treatment, high temperature resistance, corrosion resistance, anti-fraying,long life,no rust. No leakage, low noise, environmental protection, beautiful appearance, convenient installation, run responsible and so on.
- 4.Material: The pump is equipped with a cast iron pump head, aluminum motor shell, PE impeller, ceramic bearings
- 5.Forbidden Fluid: Dangerous liquid which contains solid particles, fibre or oil stains is not allowed. Explosive, mucous or corrosive liquid is forbidden. Fluid temperature range: 0-100℃(0-212℉);Ambient Temperature: Permissible up to 40℃(104℉)
- 6. Note: A minimum inlet flow rate of 0.26 GPM is required to ensure automatic starting.
- 7. Note: The pump is booster and circulator pump, Set the button to auto, the pump is booster pump; Set the button to manual, the pump is circulator pump.
