SpaGuts Universal Flo-Thru Heater Element, 4.0KW 220V, Incoloy 800 (Non-Coated). Made in USA! This is the standard type heater element primarily used in most spa controllers in the after-market and OEM controller or packs. Comes with 1-year limited warranty.
- If your spa fails to heat the water properly, the heater element should always be checked. Defective elements that have been damaged by poor water balance usually trips the GFCI when the heater comes on. Elements that have just stopped working just don't heat. Most heater elements go bad because of improper water chemistry. To help you improve your water chemistry, we recommend the book, Spaaaahhhhhh The Owner's Guide to Understanding Spas and Hot Tubs. Regardless of the age of your spa pack, if the only thing broken is the heater element, the economical thing to do is to replace the heater element.
- This replacement heater element fits any spa controllers or spa packs that takes a universal hi-flo element including products made by Balboa, Gecko, Spa Builders, Hydro Quip, ACC, Acura Spas, Len Gorden, Coleman, Watkins, Dimension One, and many others. The heater housing must be a Flo-Thru metal tube, at least 15 inches long, and at least 2 inches in diameter. The heater terminals should be more towards one side of the heater tube.
- For 110V application the 4.0 kw heater element outputs 1.0 kw (4.0 kw = 13648 BTU). Heater Elements that we provide are OEM Factory Replacement Parts and made in the U.S.A. This heater elements are USA and Canada Underwriters Laboratories listed for your safety.
- Heater Dimension: 10 inches long, 1.37 inches across and fits in a 15 inch long Flo-Thru heater metal tube that is at least 2 inches in diameter. The distance between the heater terminals from center point is 1.25 inches. The heater terminals are more towards one side of heater. To determine whether a universal element will work in your controller, remove your existing element from the controller. If the element has two probes on it that drop into the control box and has the same shape as the one above, then it will work in your controller.
- The 4.0KW Heater Element fits the following Heaters: C2400-0304, C2400-1054, C2400-0535, C2400-0809, C2400-0321, C2400-0165, 20-00518, C2400-2315, C2400-0307, C2400-0002, C2400-0073, C2400C2550-2, C2400-0313N, C2400-0213N, C2400-0256, C2400-0056, C2400-0000, C2400-1227, C2400-1206, 25-150-1025, C2400-5000-2, 25-175-8104, 58104
- If your spa fails to heat the water properly, the heater element should always be checked. Defective elements that have been damaged by poor water balance usually trips the GFCI when the heater comes on. Elements that have just stopped working just don't heat. Most heater elements go bad because of improper water chemistry. To help you improve your water chemistry, we recommend the book, Spaaaahhhhhh The Owner's Guide to Understanding Spas and Hot Tubs. Regardless of the age of your spa pack, if the only thing broken is the heater element, the economical thing to do is to replace the heater element.
- This replacement heater element fits any spa controllers or spa packs that takes a universal hi-flo element including products made by Balboa, Gecko, Spa Builders, Hydro Quip, ACC, Acura Spas, Len Gorden, Coleman, Watkins, Dimension One, and many others. The heater housing must be a Flo-Thru metal tube, at least 15 inches long, and at least 2 inches in diameter. The heater terminals should be more towards one side of the heater tube.
- For 110V application the 4.0 kw heater element outputs 1.0 kw (4.0 kw = 13648 BTU). Heater Elements that we provide are OEM Factory Replacement Parts and made in the U.S.A. This heater elements are USA and Canada Underwriters Laboratories listed for your safety.
- Heater Dimension: 10 inches long, 1.37 inches across and fits in a 15 inch long Flo-Thru heater metal tube that is at least 2 inches in diameter. The distance between the heater terminals from center point is 1.25 inches. The heater terminals are more towards one side of heater. To determine whether a universal element will work in your controller, remove your existing element from the controller. If the element has two probes on it that drop into the control box and has the same shape as the one above, then it will work in your controller.
- The 4.0KW Heater Element fits the following Heaters: C2400-0304, C2400-1054, C2400-0535, C2400-0809, C2400-0321, C2400-0165, 20-00518, C2400-2315, C2400-0307, C2400-0002, C2400-0073, C2400C2550-2, C2400-0313N, C2400-0213N, C2400-0256, C2400-0056, C2400-0000, C2400-1227, C2400-1206, 25-150-1025, C2400-5000-2, 25-175-8104, 58104
