FRONTEC TV Bias Lighting USB LED Strip Lights for 32-40 Inches TV for Back of TV Home Theater Decor 20 Color Options Dimmable Remote;

LED strip lights for TV 32-46 inch
Specification: 
- USB operated, DC 5V power supply. 
- RGB SMD5050 leds Chips, PU glue waterproof. 
- 4 Pcs RGB LED light strips. 
- 3 pcs 4 inches connectors and 1 piece 23.5 inches USB cable. 
- 1 piece 24 keys IR remote control. 

Features: 
Applications: Bias lighting for TV
Adjustable light: 16 RGB colors change lights and 4 dynamic modes, 10 dimmable.
Energy Saving: Save up to 85% energy, 50000hrs.

Attention: 
Please clean the back of TV before install the TV backlight, and don't fold or wrap the LED light strip. 
Keep the lights strip arrows "→"in the same direction, "+5V" connected with +5V. 
Make sure the IR sensor is not be blocked,connect the LED strips with the USB cable in the TV USB ports. 
Remove the insulation spacer from remote control, push the "ON", the led strip white light will light on. 
Pls test the light performance before hooking up, connect LED strips and plug USB cable into TV USB port, keep tv LED strips lighted on for about 5 mins without any flicker. 

How to solve the following issues you may meet? 
1.The light can't be turn on/off by remote. 
- As the remote is IR control, please adjust the signal receiver postion, keep the remote close to tv edge to make sure the remote controller works. 

2.The light flicker When plugged in. 
- It caused because the TV USB port can not supply enough power, please use a USB wall charger to light up the light strips.
- It happen that the four lights strip are not connected properly. Make sure the lights strip and connector "+5V R G B" should connected to "+5V R G B" properly before Plugged in. 

3. The light still a little filcker when tv is off. 
- The TV USB port still supply power current after tv off, please use tv lights remote to turn the backlight strip off.