Stanbroil Barbecue Auger Motor fits all Traeger pellet grills (except PTG)
When your fuel peters out and won't flow into the fire ignition, it's time for a new Auger Drive Motor. It's easy to replace and you won't have to read pages of installation instructions.
A pellet grill Auger Drive Motor keeps the fuel moving into the firepot. Keep pumping out delicious meals by replacing it when your pellets won't feed to the fire.
Keep the fire fed with a replacement Auger Drive Motor. Wood-fired food is the most delicious when it's fully cooked, so keep the pellets flowing.
Note: Please do not use this product in a humid condition.
- 【Compatibility】The auger motor replacement is compatible with all Traeger grill mode (EXCEPT PTG) and Pit Boss wood pellet grill smokers;
- 【Specifications】1.6 RPM, 120V 60Hz , 2 Pole;
- 【Material】 Made of Ul 1332/18awg Pep high-temperature resistance wire and heavy duty plastic construction, the auger motor is built to last;
- 【After-Sales Service】100% customer satisfaction; If you have any questions when you receive the replacement auger motor, please feel to contact us directly; We will give you a satisfactory reply within 24 hours;
- 【Installation Insturctions from our customer】 1) Empty wood pellet bin; 2) Unscrew the auger shim holder screw at the bottom of the bin; 3) Remove the bottom of the bin cover by unscrewing 4 screws; 4) Unplug the motor; 5) Unscrew the bolt & nut holding the auger/motor; 6) Plug in the motor; 7) Install new motor.
- 【Compatibility】The auger motor replacement is compatible with all Traeger grill mode (EXCEPT PTG) and Pit Boss wood pellet grill smokers;
- 【Specifications】1.6 RPM, 120V 60Hz , 2 Pole;
- 【Material】 Made of Ul 1332/18awg Pep high-temperature resistance wire and heavy duty plastic construction, the auger motor is built to last;
- 【After-Sales Service】100% customer satisfaction; If you have any questions when you receive the replacement auger motor, please feel to contact us directly; We will give you a satisfactory reply within 24 hours;
- 【Installation Insturctions from our customer】 1) Empty wood pellet bin; 2) Unscrew the auger shim holder screw at the bottom of the bin; 3) Remove the bottom of the bin cover by unscrewing 4 screws; 4) Unplug the motor; 5) Unscrew the bolt & nut holding the auger/motor; 6) Plug in the motor; 7) Install new motor.
