MCIGICM LM2596 DC-DC Step-Down Buck Converter Power Module
Features:
Module property:Non-isolation buck
Rectification mode:Non-synchronous rectifier
Input voltage:3V-40V
Output voltage:1.3V-35V
Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
Conversion efficiency:92%( highest )
Switching frequency:65KHz
Output ripple:30mV( maximum )
Load regulation:±0.5%
Voltage regulation:± 2.5%
Work temperature:-Minus 40 degrees - 85 degrees
Dimension:43mm*21mm*14mm(L*W*G)
Package:
6 * Lm2596 dc-dc buck converter step down module
Warranty:
Each of product from MCIGICM enjoys 12 months warranty and *30-day money-back guarantee* for any reason
- Input: DC 3 V to 40 V . **NOTE** Input voltage must be 1.5 V higher than the output voltage, no boost.
- Output: DC 1.5 V to 35 V. Output current: 3A ( Max).
- All products are tested for stability, consistency and reliability. Ensure product excellence.
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)
- Input: DC 3 V to 40 V . **NOTE** Input voltage must be 1.5 V higher than the output voltage, no boost.
- Output: DC 1.5 V to 35 V. Output current: 3A ( Max).
- All products are tested for stability, consistency and reliability. Ensure product excellence.
- Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down)