This 3/4'' brass motorized ball valve from U.S. Solid comes in a strong durable brass. It is a great option for the DIY project, but strong enough for big businesses. The stem and body of the valve are comprised of hefty brass. This is key, since many people use these valves in their home water systems.
The valve actuates with 9-24V of AC or DC power. When energized, it will open fully in 3-5 seconds. Since this valve is a normally closed (N/C) ball valve, it will automatically return to a closed position when the power source is eliminated. When fully opened, a limit switch keeps the amount of power used by the valve to a miniscule levels. This makes it a much more environmentally friendly option than most solenoid valves. Most solenoid valves are fully energized when opened, which can lead to problems and overheating when run continuously. This valve draws such low levels of power once fully opened that it can be run continuously and never overheat.
The stem on this valve comes with a robust torque rating of 2 N m. This is important, though often overlooked. The stem is a frequent point of failure for valves, and having a strong stem helps to ensure a lifetime of quality performance.
There are many different potential uses for this motorized ball valve. While not quick acting, it is sturdy and resilient once energized. They can also work effectively even with gravity flow operations, such as those used in some auxiliary fuel tank setups.
Specifications
Valve Material: Brass(Lead content ~ 3.05%)
Ball Seat: PTFE
Seal: EPDM
Close/Open Time: 3-5 Seconds
Working Voltage: 9-24V AC/DC
Max Power: 2W
Max Torque: 2 N m
Max Pressure: 1.0Mpa
Temperature range for Flow Medium: 0°C to 90°C
Ambient Temperature Range: -10°C to 40°C
Enclosure Rating: IP65
Life Expectancy: 80,000-100,000 Cycles
Bore Type: Standard
Thread Type: NPT
- SAFE AND RELIABLE- Comprised of brass this valve is safe and strong; Lifespan of 80,000-100,000 cycles means a valve that will last
- NPT THREADING-3/4” Brass threading, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is standard port, meaning the bore in the ball is a little less than 3/4”; This minimizes pressure loss through the valve; Perfect for home automation projects
- 9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening; Returns to fully closed if power is removed
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time
- SAFE AND RELIABLE- Comprised of brass this valve is safe and strong; Lifespan of 80,000-100,000 cycles means a valve that will last
- NPT THREADING-3/4” Brass threading, manufactured and measured according to National Pipe Thread standards; This electrical ball valve is standard port, meaning the bore in the ball is a little less than 3/4”; This minimizes pressure loss through the valve; Perfect for home automation projects
- 9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; Limit switch minimizes power after valve is fully open; Ideal for projects where an automatic return is necessary
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening; Returns to fully closed if power is removed
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time