For iPhone 6S Plus Screen Replacement LCD Display with Home Button Front Camera Speaker 3D Touch Digitizer Glass Assembly +Tools for iPhone 6s Plus Black 5.5'' (A1634, A1687, A1699);

Note:
*This part does include the home button, front facing camera, earpiece speaker, and the LCD shield plate.
*You will not need to transfer these parts from your old display assembly to your new part.
*Touch ID Not Available, this home button does not have the touch ID/Fingerprint identification function.you will need to transfer the home button from you original screen onto this display assembly to retain this function.
*When removing the screen, it is highly recommended to use a blow dryer to heat the edges which helps to separate the screen from the seal.
Fix Kit Contents:
1 * LCD Screen
1 * 8 in one Iphone Boot tool
1 * Nano Protective Film
Compatibility:
*All iPhone 6S plus plus (Not iPhone 6 plus)
Instruction:
FAQ:
Q: Plugged the new screen in and it doesn't work?
A: When reassembling your phone, the display data cable may pop off its connector. This can result in white lines or a blank
screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone.
Q: Don't power up when fitted to iPhone 6S plus plus?
A: Mark down all the screws you remove while disassembled the screen, incorrect placement of these screws during reassembly
Will cause permanent damage to your iPhone's logic board.
please pay attention to :
1. When reassembling your phone,please power off, and flex cable should connect one by one to the phone motherboard dock well.
2. If the phone get warm or not working, please remove the screen, cleaning the flex cable with alcohol, try to turn off the battery and restart again , or even refresh its system. installing the screen again.
We all full test the product and 100% working before shipping. we put the quality at first place, and will keep doing better.*If there are any problems with the product please inform us, we will have a professional staff for you to solve!