OctagonStar Flexible Couplings 5mm to 8mm NEMA 17 Shaft for RepRap 3D Printer or CNC Machine（2PCS）

Mechanical Endstop kit is for RepRap 3D Printers or CNC machines. It is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.

Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.

Connection Description:
Red line connecting VCC (ramps of +)
Connect the black wire GND (ramps of -)
Green Line connection SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Pros: Easy to install, the more common styles
Length of Cable: 70 cm
Size: 32 x 10mm
Quantity: 6 set

Package include:
6 x Mechanical Switch Endstop
6 x 3Pin 70cm Cable

Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.
Customized high quality connection, using 22AWG wire, the copper wire inside is thick which can withstand 2A current, 300V voltage.
Wide insulation temperature range: The insulation temperature can reach up to 80 degrees, better than the ordinary thin copper wire.
Red line connecting VCC (ramps of +); Connect the black wire GND (ramps of -);Green Line connection SIGNAL (ramps in s).
The wire is strong and convenient for plug, can be inserted directly to use.
Mechanical Endstop kit is for RepRap 3D Printers or CNC machines, it is supported by RepRap electronics, RAMPS 1.4 and by other popular RepRap boards.
Customized high quality connection, using 22AWG wire, the copper wire inside is thick which can withstand 2A current, 300V voltage.
Wide insulation temperature range: The insulation temperature can reach up to 80 degrees, better than the ordinary thin copper wire.
Red line connecting VCC (ramps of +); Connect the black wire GND (ramps of -);Green Line connection SIGNAL (ramps in s).
The wire is strong and convenient for plug, can be inserted directly to use.

Top WaffleMaker Reviews

Longruner for ArduinoIDE Mini V3.0 ATmega328P 5V 16M Micro Controller Board Module with USB Cable for ArduinoIDE 5 Pcs (LKB01);