Arteck Car Jump Starter Auto Battery Charger and 12000mAh USB-C External Battery Charger Car Jumper for 12V Automotive, Motorcycle, Boat, Phone with Clamps, 800A Peak 5.0L Gas 3.0L Diesel Max;

Easy to Use Car Jump Starter
If your car won't start don't call a tow truck service or wait on the side of the road for help. Use the Arteck with the jumper cables to start your car battery in a matter of seconds. Jump your vehicle up to 20 times on a single charge, with heavy duty cables and clamp built in.

Portable Battery Charger on the Go
The Arteck great travel companion that you can take with you on the go to charge all of your portable electronic devices, such as smart phones, tablets, cameras, GPS unit, MP3 players, wireless headphones, and portable gaming systems, etc.

Portable LED Flash Light for the Outdoors
The ultra-bright LED flash light has 3 illumination modes, a flash light when you¡¯re in the dark, a strobe light to attract attention, and most importantly an SOS signal flash that will last up to 120 hours on a full charge for when you're outdoors and in need of emergency help.

How To Use the Powerall To Jump Start A Vehicle Battery
1. Make sure the battery capacity of the device is above 50%.
2. Plug the jumper cables into the barrel socket of the device and connect the jumper cable clamps to the drained battery of the vehicle.
WARNING: Always connect the BLACK clamp to the negative ( - ) terminal of the car battery first, then connect the RED clamp to the positive ( + ) terminal of the car battery. Do not touch the RED and BLACK cable clamps together or connect both cable clamps to the same piece of metal.
3. Now attempt to crank start the engine.
WARNING: If the engine does not start immediately on the first try, disconnect the jumper cables from the car battery and wait at least 10 seconds before reconnecting the jumper cables to the car battery.
4. Once the engine has successfully started, disconnect the jumper cable clamps immediately.
PLEASE KEEP AWAY FROM CHILDREN AT ALL TIMES!