THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)
- 1997-1999 Acura CL
1986-1990 Acura Legend
1996-1998 ACura TL
1992-1994 Acura Vigor
1990-2002 Honda Accord
1992-1996 Honda Prelude
1995-1998 Hyundai Accent
1992-2006 Hyundai Elantra
1993-2002 Hyundai Sonata
1997-2001 Hyundai Tiburon
2001-2005 Kia Optima
2005-2009 Kia Spectra 5
1993-1998 Mitsubishi Galant
2002-2006 Mitsubishi Lancer (OZ Rally Sedan 4 Door Only)
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
