Description
WHY WE NEED XENON HID CANCELER?
When a HID kit is installed in newer car models or cars with a computer controlled unit, often there is an error code showing on the dash board or the HID lights keep flickering and would not stay on.
This is due to the fact that the HID kit is triggering a bulb out warning signal in your car's computer control unit.
Features:
Professionally Solve the error information on the dash board.
Make your HID headlights stop flickering.
Get rid of computer error warning encountered during the installation of the HID kits.
Suitable for all cars that have computer controlled headlights.
Different situations Different solutions
It can solve the problems as below:
The indicator of the instrument panel lights when the headlight is used as Fault Light.
The indicator of the instrument panel doesn't light when the headlight is used as High Beam.
The Xenon lights flash when starting the engine.
The engine stops working when turning on the Xenon lights.
Eliminate the interference of the Ballast to the trip computer
Xenon lights don't light.
Xenon lights keep flashing after installation.
One of the Xenon light works, but the other one doesn't light.
Xenon lights automatically turn off after lighting up for few minutes.
Note: The Capacitor Harness can only install between the "BALLAST AND OEM HEADLIGHT HARNESS", it can not be installed anywhere else.
Warning: Some vehicles may have reverse polarity. Reverse polarity can cause a BOW to explode. We recommend wearing safety glasses and closing your hood before testing the BOOM on your vehicle.
- Xenon Anti-Flicker Warning Cancelers: Only work for HID xenon LIGHT, no work with led headlight.
- Why need Canceler: When a HID kit is installed in new car models or cars with a computer controlled unit, often there is an error code showing on the dash board this is due to the fact that the HID kit is triggering a bulb out warning signal in your car's computer control unit.
- Easy and Simple installation: Usually takes less than 20 minutes! "Plug-and-Play" in most vehicles. Some vehicles may need professional installation.
- Installation Caution: The special wire harness needs to be used with caution: Red wire needs connect to positive (+), black connect to negative (-). There is a capacitor on this wire harness to by-pass the error message signal and the capacitor is polarity sensitive, so the red and black wires need to be in the correct position. OTHERWISE THE CAPACITOR WILL BE BURNED. Please use a voltage meter to make sure the correct polarity before installation.
- Cancel 'bulb out' or 'bulb failure' warnings when your car dashboard displays such info and it may prevent in certain vehicles the lights from flickering. Great for low voltage vehicles
- Xenon Anti-Flicker Warning Cancelers: Only work for HID xenon LIGHT, no work with led headlight.
- Why need Canceler: When a HID kit is installed in new car models or cars with a computer controlled unit, often there is an error code showing on the dash board this is due to the fact that the HID kit is triggering a bulb out warning signal in your car's computer control unit.
- Easy and Simple installation: Usually takes less than 20 minutes! "Plug-and-Play" in most vehicles. Some vehicles may need professional installation.
- Installation Caution: The special wire harness needs to be used with caution: Red wire needs connect to positive (+), black connect to negative (-). There is a capacitor on this wire harness to by-pass the error message signal and the capacitor is polarity sensitive, so the red and black wires need to be in the correct position. OTHERWISE THE CAPACITOR WILL BE BURNED. Please use a voltage meter to make sure the correct polarity before installation.
- Cancel 'bulb out' or 'bulb failure' warnings when your car dashboard displays such info and it may prevent in certain vehicles the lights from flickering. Great for low voltage vehicles
