Dorhea Raspberry Pi 4 B 3 B+ Camera Module Automatic IR-Cut Switching Day/Night Vision Video Module Adjustable Focus 5MP OV5647 Sensor 1080p HD Webcam for Raspberry Pi 2/3 Model B Model A A+

The CSI-HDMI adapter board is designed for V1 and V2 Raspberry pi camera board to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.
By using high speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras.
In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector.
It can be used to extend standard audio signals, GPIO signals or other sensor signals according to users need.
If you need a longer and stronger cable with solid connections, it is right thing for you.

Features:
Supported for Raspberry Pi A/B/B+ boards or Raspberry Pi 2B board or Raspberry Pi 3B board
Supported for Raspberry Pi camera board V1 (5MP OV5647) or raspberry pi camera board V2 (8MP IMX219)
HDMI cables can be up to 10 meters (more than 10 meters wasn't tested)
Reserved microphone and headphone jack for audio or GPIO signals
Three additional solder pads are available (same signals as headphone jack)
Size:27.63 x 25.00mm

Package Including:
2pcs Arducam CSI to HDMI Cable Extension Module
2pcs 60mm 15pin FPC cable
4sets M2 screw

Supported Platforms: NVIDIA Jetson Orin Nano, Raspberry Pi 4B, 3B+, 3B, 2, Model A/B/B+, and Pi Zero
This Arducam CSI to HDMI Cable Extension Module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1, V2, V3, and HQ cameras
By using high speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras
In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector
If you need a longer and stronger cable with solid connections, it is right thing for you. This system works with all Raspberry Pi models
Note: Please be sure to use a high-quality HDMI cable, which allows the camera to run 3-5 meters, greatly extending the usage of the Pi camera.
Supported Platforms: NVIDIA Jetson Orin Nano, Raspberry Pi 4B, 3B+, 3B, 2, Model A/B/B+, and Pi Zero
This Arducam CSI to HDMI Cable Extension Module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1, V2, V3, and HQ cameras
By using high speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras
In addition to extend the camera signal, the adapter board provides another 3 signals to be extend with the camera signals together via the headphone jack connector
If you need a longer and stronger cable with solid connections, it is right thing for you. This system works with all Raspberry Pi models
Note: Please be sure to use a high-quality HDMI cable, which allows the camera to run 3-5 meters, greatly extending the usage of the Pi camera.

Top WaffleMaker Reviews

Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera V3/V1/V2/HQ (Pack of 2, 1 Set);