SinLoon 2 Port USB 2.0 Motherboard Rear Panel Expansion Bracket to IDC9Pin
1.Motherboard USB Cable
2.USB Interface: USB 2.0.
3.Connect Main Board Plug Type: 9 Pin.
4.Instructions: Baffle fixed in the chassis, and then insert the line into the motherboard USB pin
5.Note that the order of the four lines is defined as follows: red is + 5V (VCC), white is data negative (-Data), green is data positive (+ Data), and black is grounded (GND).
Package Content : 2pcs*Computer Cable is included
- Connections: USB 2.0 Female (x2), 9 pin motherboard
- cable Length: 11inch(30cm), Comes with bracket Doesn't take up PCI slot
- This lets you add USB ports without having to take up any PCI slots. This is an external backup 2 ports USB 2.0 hubs Mainboard bracket with 9 pin header female to connect with the mainboard. Easily install and use!
- Connect Main Board Plug Type: 9 Pin.
- Package Content : 2pcs*Computer Cable is included.
- Connections: USB 2.0 Female (x2), 9 pin motherboard
- cable Length: 11inch(30cm), Comes with bracket Doesn't take up PCI slot
- This lets you add USB ports without having to take up any PCI slots. This is an external backup 2 ports USB 2.0 hubs Mainboard bracket with 9 pin header female to connect with the mainboard. Easily install and use!
- Connect Main Board Plug Type: 9 Pin.
- Package Content : 2pcs*Computer Cable is included.