Fit For:
17inch 1280*1024:
M170EG01 M170EG02 M170EN01 M170EN04 M170EN05 M170EN06 LM170E03 LTM170EX
LTM170EU LTM170EH LTM170E5 LTM170E6 LTM170E8 HSD170ME13
19inch 1280*1024:
LM190E02 LM190E03 LM190E08 M190E5 G190EG01 M190EG02 M190EG03 M190EN01 HSD190MEN4
HSD190ME11 HSD190ME12 HSD190ME13 LTM190EX LTM190E1 LTM190E2 LTM190E3 LTM190E4
Package content:
1× HDMI+DVI+VGA+Audio lcd controller board
1× FIX-30Pin LVDS Cable
1× 4CCFL inverter board
1× Keyboard with Wire
1× Screw And Nut To Properly Ground The Board.
Note:
1.Power Supply is NOT included
2.If you dont know how to connect the Screen,please feel free to contact us
- 【LCD Driver Board】 Work for 1280x1024 30 Pins 5V LVDs LCD display. video input: H-D VGA DVI ,Audio output: speaker connector ( 8ohm 2W 4Pin PH2.0 connection).
- 【Compatible Screen models 】17" LTM170EU LTM170EH LTM170E5 LTM170E6 HSD170ME13 M170EG01 M170EG02 M170EN01 M170EN05 M170EN06 LM170E03
- 【Compatible Screen models 】19" LM190E02 LM190E03 LM190E08 G190EG01 M190EG02 M190EG03 M190EN01 HSD190ME11 HSD190ME12
- 【Plug and play】Connecting the cables and ports as link pictures, Power on ,enter into signal,the screen can be lit up.Pls use in insulated environment to avoid short road.
- 【Input power supply】12V DC more than 3A ,Port size :5.5x2.1mm, pls prepare power adapter by yourself.
- 【Board failure self-check】: Directly power on board ,The LED light green/red means board can work normally ;Then connect screen signal port, No enter signal ,the"no siganl" words showing on screen means the problem comes from signal ,Pls try with other signal cable /resource; White/Black screen ,Check screen signal port connecting/resolution/5V jumper pin/Signal resource.
- 【LCD Driver Board】 Work for 1280x1024 30 Pins 5V LVDs LCD display. video input: H-D VGA DVI ,Audio output: speaker connector ( 8ohm 2W 4Pin PH2.0 connection).
- 【Compatible Screen models 】17" LTM170EU LTM170EH LTM170E5 LTM170E6 HSD170ME13 M170EG01 M170EG02 M170EN01 M170EN05 M170EN06 LM170E03
- 【Compatible Screen models 】19" LM190E02 LM190E03 LM190E08 G190EG01 M190EG02 M190EG03 M190EN01 HSD190ME11 HSD190ME12
- 【Plug and play】Connecting the cables and ports as link pictures, Power on ,enter into signal,the screen can be lit up.Pls use in insulated environment to avoid short road.
- 【Input power supply】12V DC more than 3A ,Port size :5.5x2.1mm, pls prepare power adapter by yourself.
- 【Board failure self-check】: Directly power on board ,The LED light green/red means board can work normally ;Then connect screen signal port, No enter signal ,the"no siganl" words showing on screen means the problem comes from signal ,Pls try with other signal cable /resource; White/Black screen ,Check screen signal port connecting/resolution/5V jumper pin/Signal resource.
