Design Your Own garments
Our HTV sheet bundle is compatible with all popular crafts cutter including Cricut, Silhouette, Craft ROBO, Xyron, etc.
Colours Included
With each bundle you will receive one sheet in each of the following colors: GOLD, SILVER, black, white, brown, orange, Yellow, Green, Light Green, Dark Blue, Light Blue, Purple, Maroon, Dark Pink, Light Pink
How To Apply
Cut design in MIRROR IMAGE. Place sheets with glossy side down (polyester carrier side down) and rubbery matte sideup. Make sure you are cutting on the material side and not on the clear film side (peel a corner to make sure if you have to). Do not use wax paper. Do not iron using a swiping motion. Press on a hard surface (preferably a table).
APPLICATION INSTRUCTIONS (HOME IRON)• Work on a clean and dry surface
• Set iron dial between cotton and linen (or hottest setting) with NO steam
• Place on a flat, hard surface (ironing board not recommended)
• Preheat garment for 4-6 seconds
• Position heat transfer garment with its polyester carrier side up
• Press iron with medium/firm pressure (do not slide)
• Press each section of the design for 15-25 seconds
• If areas of the design lift after application, repress for 10 seconds
• Please note that our product is COLD PEEL.
APPLICATION INSTRUCTION (HEAT PRESS)
• Preheat garment for 2-3 seconds
• Apply design at 335° F
• Use light/medium pressure for 10-15 seconds
• Let design completely COOL before peeling
APPLIES TO
• 100% Cotton
• Ply/cotton blends
• 100% Polyester
• Nylon
CARE INSTRUCTIONS
• Do not dry clean do not chlorine bleach
• Low dryer setting
• Do not iron design, iron on the backside of the garment
