Low Voltage Cutoff, Icstation DC 6V-60V Battery Charge Controller Protection Switch Low Voltage Protection Module with LED Display for Lead Acid Lithium Battery Solar Panel;

This digital battery charging protection switch is specially designed for the DC6-60V battery. On-board momentary push button to set the charging initiation voltage and charging stop voltage, when the battery voltage reach the setting values, the module will disconnect the charging circuit automatically to aviod the battery from overching to prolong the battery lifetime.

Specifications:
Input Voltage Range: DC6-60V
Dispaly and Control Accuracy: 0.1V
Compatible Battery:lead acid,lithium ion battery,solar panel battery(DC 6-60V)
Board Size: 81 X 54 X 18mm/3.19 X 2.13 X 0.71inch(L*W*H)

Package Included:
1X Lead Acid Lipo Battery Charge Controller

Operation Manual:
1.Set the charging initiation voltage: Under the normal voltage display status, press the "Start" button, the module will display the charging initiation voltage, long press this button about 3s, the LED flash, then press the "Start" and "Stop" button to set the vlues.
2.Set the charging stop voltage: Under the normal voltage display status, press the "Stop" button, the module will display the charging stop voltage, long press this button about 3s, the LED flash, then press the "Start" and "Stop" button to set the vlues.
3.Reset:under the normal display status, press the "Start" and "Stop" button at the same time the LED will display"888", then release and finish.(the default charging initiation voltega is 12V and charging stop voltage is 14V)
4. Voltage Setting Calculation: Charging Initiation Voltage= Battery Rated Voltage*0.9; Charging Stop Voltage=Battery Rated Voltage*1.2; Charging Current= Battery Rated Current*0.1

Note:
This module do not have the buck converter function.