2.5 Inch 3 Way Y Connector with Openings OD 2-7/16 Inch and ID of 2-3/16 Inch ABS Plastic for Dust Collector Systems 73456

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suction strongest where dust is being produced, thus maximizing dust extraction. These ABS plastic blast gates are very economically priced to allow you to outfit your dust collection system for maximum performance. These fittings are abrasion resistant and are designed to withstand the abrasive nature of wood chips and saw dust. Due to the potential for built up of static electricity, it is recommended that all dust collection systems with plastic fittings be properly grounded.

Both openings are 2.460" OD and taper to 2.500" OD
Will allow attachment to 2.5" flexible hose or tapered dust fittings
Made from strong 1/8" thick abrasion resistant ABS plastic that will withstand abrasive nature of sawdust and wood chips
Inside is smooth to allow maximum airflow
Built in stop to prevent sliding plate from coming out of housing
Both openings are 2.460" OD and taper to 2.500" OD
Will allow attachment to 2.5" flexible hose or tapered dust fittings
Made from strong 1/8" thick abrasion resistant ABS plastic that will withstand abrasive nature of sawdust and wood chips
Inside is smooth to allow maximum airflow
Built in stop to prevent sliding plate from coming out of housing

Top WaffleMaker Reviews

2-1/2 Inch ABS Plastic Blast Gate 2-1/2 Inch OD Openings on Both Sides for Dust Collection Systems 73449;