This universal fuel line will fit on any standard 3/8 inch hose barb in any fuel system. Sized at 3/8" ID x 3ft, comes in handy just about anywhere fuel line is needed. It can be used anywhere on a car or truck fuel system. Universal in design and very flexible, this fuel line can be used anywhere! Works great as transfer line from your hard fuel line to fuel pump or from pump up to the fuel filter or carburetor. 3ft fuel line features a flexible rubber 3/8" ID hose, covered with a steel braided jacket with bright anodized red & blue clamp covers on each end. This hose section of 36" can be cut to any size needed & works on all gasoline applications, such as lawn mowers, tractors, go carts, snow blowers, motorcycles, cars & trucks.
Specification:
Brackets Included: No
Hardware Included: No
Plug Wire Attachment Style: Clamp-in
Quantity: Sold as a kit
Wire Separator Finish: Chrome
Wire Separator Material: Plastic
Wires Per Separator: 2, 3, 4
Fits 7mm and 8mm spark plug wires; come with allen arench; keep the wires from heat
Hose Color: Natural
Hose Material: Braided steel
Hose Inside Diameter: 0.375 in
Hose Outside Diameter: 0.547 in
Hose Length: 3 feet
Note:Not suitable for fuel injection systems or E85 fuels
How to Cut:
For cutting your new steel braided hose to length you will need:
* cutting wheel/ hack saw/ or steel braided hose cutters
* duct tape or electrical tape (work best)
1. Measure your hose and find desired length.
2. Tape hose at measured length needed for application.
3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)
4. Remove the tape.
5. Slide one end of hose into end of fitting.
6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.
7. Make sure all connection are tight.
Package Included: 1 x Fuel hose
