About The Ram-Pro Countersink Drill Bits Kit
So you are building any project at your home office or workshop & you would like those screws, Nails or Bolts to be flush mounted flat with the surface so they won't stick out, so you would countersink the screw holes.But why pre-drill with 1 bit & countersink with another 1 when you can have it in 1 easy tool?!
OUR SOLUTION:The Ram-Pro Professional 3-in-1 Counter-sinking Drill Bits lets you Pre-drill & cone-shape the hole where the screw heads will countersunk & sit comfortably below the surface of the surroundings.Kit also includes stop collars for controlling drill bit depth to a precise setting.It's recommended to use drill collars with a lubricant to prevent burning of the material surface.
ADJUSTABLE:Both the Countersink bits & the collars have hex nuts for easy adjusting tightening & accurate positioning.Kit comes with the Correct Allen Wrench for tightening the nuts.
USE FOR:Great for hinge, Stair book case, coffee table, chair, cabinet, closet, wall, desk, bed, kitchen, bedroom, office, studio, dresser, bench.Countersink may also be used to remove burr left from a drilling/tapping operation thereby improving the finish of the project & removing any hazardous sharp edges.(Countersink unlike counterbore makes a cone shaped hole while bore produces a Flat-bottom rounded hole.)
YOU GET:• 7 Drill bits
• 7 Countersink bits
• 7 Stop Collars
• Allen Wrench
Bit lengths:#5 3-1/32
#6 3-5/32
#7 3-2/8
#8 3-11/32
#9 3-5/16
#10 3-9/16
#12 3-9/16
Easy identification:Bit Sizes are carved on the bits for clear identification which bit for the correct screw.Works with all types of wood/lumber: Plywood, Pine, Oak, Birch, Mahogany, Maple, Cedar, Fir, Cherry, Poplar, Alder, Ash, Walnut, Hemlock.
A must have for every woodworker & carpenter.- ✓ The Ram-Pro Countersink & Counterbore Wood Drill Bit Kit pre-drills holes and countersinks even hardwood and aluminum, thereby reducing the risk of splitting the panel, and giving every screw nail or bolt a nice appearance as it appears flush with the furniture’s surface, and can be covered nicely with wooden plugs.
- ✓ SPECS: 7 Countersink 4-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Compatible with Screw Sizes: #5, 6, 7, 8, 9, 10, 12. - Bit sizes: 1/8", 9/64, 5/32, 11/64, 3/16, 13/64, & 7/32 inch - Allen Wrench: 3/32” diameter.
- ✓ DESIGN & QUALITY: No More Splitting Woods! The Ultimate 2-in-1 countersink drill bit design Made of high speed heat treated Carbon Steel so the bits have sharp tips and are able to sustain through heat and pressure without breaking/shattering and damaging the panel or beam you are building – Bit sizes are carved onto the drill bits for identification.
- ✓ NICE APPEARANCE: The drill bits drills pilot holes nicely and accurately with precision time and time again getting a precise cone shaped hole on each burr, as a result you will get a nice smooth surface on any type of hard, soft wood or aluminum.
- ✓ USES: Attach to any Power Bench or Hand drill driver - When Woodworking or Building Molding, enlarge and bevel the rim of a drilled hole so that a screw, nail, or bolt can be inserted flush with the surface you are working on, Example: Hinges - the bits also wipe away any burr left from any application, thereby improving the finish and removing hazardous edges.
- ✓ The Ram-Pro Countersink & Counterbore Wood Drill Bit Kit pre-drills holes and countersinks even hardwood and aluminum, thereby reducing the risk of splitting the panel, and giving every screw nail or bolt a nice appearance as it appears flush with the furniture’s surface, and can be covered nicely with wooden plugs.
- ✓ SPECS: 7 Countersink 4-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Compatible with Screw Sizes: #5, 6, 7, 8, 9, 10, 12. - Bit sizes: 1/8", 9/64, 5/32, 11/64, 3/16, 13/64, & 7/32 inch - Allen Wrench: 3/32” diameter.
- ✓ DESIGN & QUALITY: No More Splitting Woods! The Ultimate 2-in-1 countersink drill bit design Made of high speed heat treated Carbon Steel so the bits have sharp tips and are able to sustain through heat and pressure without breaking/shattering and damaging the panel or beam you are building – Bit sizes are carved onto the drill bits for identification.
- ✓ NICE APPEARANCE: The drill bits drills pilot holes nicely and accurately with precision time and time again getting a precise cone shaped hole on each burr, as a result you will get a nice smooth surface on any type of hard, soft wood or aluminum.
- ✓ USES: Attach to any Power Bench or Hand drill driver - When Woodworking or Building Molding, enlarge and bevel the rim of a drilled hole so that a screw, nail, or bolt can be inserted flush with the surface you are working on, Example: Hinges - the bits also wipe away any burr left from any application, thereby improving the finish and removing hazardous edges.
