This daytime running light (DRL) harness allows your daytime running lights to be on when your headlights are on. This Will Fit ALL 2010-2013 CAMARO'S With RS package(Does not work for 2012-2013 ZL1) Installation: 1- Turn the wheels all the way to left to gain access to the screws on the passenger side fender well liner 2- Remove the 3 (T20) torx screws holding the fender liner to the bumper. ZL1 owners also remove the 3 screws under the bumper. This will allow you access to the forward lamp harness connector 3- Locate the forward lamp harness and disconnect 4- Plug our harness inline 5- Reconnect the other end of the harness to our harness 6- Verify operation. With headlamps on your DRL's should also be on 7- Reinstall fender liner screws. Package: 1 x DRL Harness
- Will Fit All 2010-2013 CAMARO'S With Daytime Running Lights (Does NOT work for 2012-2013 ZL1)
- Plug and Play Harness. Simple 5 minute install. See below for install directions.
- This will allow your Camaro's day time running lights to function at night while your headlights are on.
- Only ONE adapter is required per vehicle. The ONE adapter will control both sides.
- Works with LED lights as well.
- Will Fit All 2010-2013 CAMARO'S With Daytime Running Lights (Does NOT work for 2012-2013 ZL1)
- Plug and Play Harness. Simple 5 minute install. See below for install directions.
- This will allow your Camaro's day time running lights to function at night while your headlights are on.
- Only ONE adapter is required per vehicle. The ONE adapter will control both sides.
- Works with LED lights as well.