UR193 Switch:
These metal buttons are rugged and look real good while doing it! Simply drill a 19mm hole into any material and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure.
On the front of the button is a high flush actuator, easy to press. On the back there are 3 terminals for the button. NC= Normal Close, NO= Normal Open, C= Common. Usually use Normal Open to control, press the button to breakover. Of course, you can also use Normal Close to control, press the button to power off.
The UR193 latching button is rated up to 5A/250VAC, 5A/30VDC. As long as you don't exceed the rating amps and volts, it can run anything.
Latching Switch:
Latching switch will latch into place, maintaining their state until pressed again latching back to where the started.
These latching buttons are perfect for Power Button Switch, Led Switch or any circuit controls. Also great for electronic DIY projects.
Note:
*These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water.
Features:
Drill hole diameter: Φ19mm (3/4")
Head diameter: 22mm (7/8")
Depth include contacts: 38mm (1.5")
Switch rating: 5A/250VAC, 5A/30VDC
Switch contacts: 1NO1NC
Operation Type: Latching
Head shape: High flush
Body material: Stainless Steel
Protection level: IP67, IK10
Package Include:
1 X Push button switch
UR193 Switch:
These metal buttons are rugged and look real good while doing it! Simply drill a 19mm hole into any material and you can fit these in place, there's even a rubber gasket to keep water out of the encl...
Similar Products
