A set of 4 guide wires for use with any 3/4" pvc weave poles (1" O.D.). Simple to install with no tools needed! These snap on and off securely and are perfect for training the weaves. A set of 4 wires is the amount you will need to complete a 6 pole circuit.
- WILL NOT FIT ANY AFTERMARKET AMAZON WEAVE POLES! MADE IN U.S.A. to fit U.S. FACTORY LABELED 3/4" PVC weave poles (homemade poles).DO NOT MEASURE YOUR PIPE AS THIS WILL RESULT IN AN INNACURATE MEASUREMENT. READ THE WRITING ON THE PIPE!!!!!!! If it doesn't say 3/4", these will not fit!!!!! No-sag lightweight pvc design. Non rigid clip design guarantees accurate fit, Clips will mold around your weave pole and not break. YOUR PIPE MUST BE FACTORY LABELED 3/4"!!!!!
- FRUSTRATION FREE-Easy clip-on, pull-off design with slide up and down height adjustment. No extra parts to buy. Ready to use out of the box.PIPE MUST BE FACTORY LABELED 3/4"!!!!
- This item is the Guide Wires only! WEAVE POLES NOT INCLUDED. PIPE MIST BE FACTORY LABELED 3/4"
- Set of 4 wires to complete a 6 weave pole circuit. **NOTE-Purchasing 2 of this item will not complete a 12 pole circuit. You will need item #B01MU19C2F. PIPE MUST BE FACTORY LABELED 3/4"
- IF YOUR PIPE DOES NOT SAY 3/4" ON THE OUTSIDE OF THE PIPE, THESE WILL NOT FIT!!!! DO NOT MEASURE THE OUTSIDE OF YOUR PIPE, this is incorrect.
- WILL NOT FIT ANY AFTERMARKET AMAZON WEAVE POLES! MADE IN U.S.A. to fit U.S. FACTORY LABELED 3/4" PVC weave poles (homemade poles).DO NOT MEASURE YOUR PIPE AS THIS WILL RESULT IN AN INNACURATE MEASUREMENT. READ THE WRITING ON THE PIPE!!!!!!! If it doesn't say 3/4", these will not fit!!!!! No-sag lightweight pvc design. Non rigid clip design guarantees accurate fit, Clips will mold around your weave pole and not break. YOUR PIPE MUST BE FACTORY LABELED 3/4"!!!!!
- FRUSTRATION FREE-Easy clip-on, pull-off design with slide up and down height adjustment. No extra parts to buy. Ready to use out of the box.PIPE MUST BE FACTORY LABELED 3/4"!!!!
- This item is the Guide Wires only! WEAVE POLES NOT INCLUDED. PIPE MIST BE FACTORY LABELED 3/4"
- Set of 4 wires to complete a 6 weave pole circuit. **NOTE-Purchasing 2 of this item will not complete a 12 pole circuit. You will need item #B01MU19C2F. PIPE MUST BE FACTORY LABELED 3/4"
- IF YOUR PIPE DOES NOT SAY 3/4" ON THE OUTSIDE OF THE PIPE, THESE WILL NOT FIT!!!! DO NOT MEASURE THE OUTSIDE OF YOUR PIPE, this is incorrect.
