3528 LED Strip Connector 8mm 2 Pin (5 PCS Terminal) With 20 Gauge Extension Wire 2 Conductor UL Listed (9.8 Feet/3 Meter), DIY Both Strip to Power Lead or Board to Board Jumper,NON-WATERPROOF;

1.LED Strip Connector Package Include

5 PCS LED Strip Connector Terminal 8mm 2 pin non-waterproof
9.84 Feet / 3 Meter 20 Gauge 2 Conductor Extension Wire UL Listed
1 PCS User Manual

2.Special Benefit you can get with it.

You will be no more limited by distance between strip light to power supply or dimmer. This connector allow you to cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation.

With 2 connector and a wire, you are able to diy a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.

No more worry strip light moving out of connector, the connector's teeth will pierce and grip the PCB tightly.

3.Tools needed to use

A pliers only

4-1 How to make a Strip-To-Strip-Bridge connector ?

1. Cut a wire for the length you want
2. Insert wire into connector's wire end
3. Clamp cap down
4. repeat step 1-3 to add another connector to the wire

4-2 How to make a Strip-To-Power connector

1. Cut a wire for the length you want
2. Insert wire into connector's wire end
3. Clamp cap down

Working Voltage: <=24V
Max Current of Pin: 5A
Pin Qunatity: 2 pin
Workable Strip Light Width: 8mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃