Gowoops 5PCS HC-SR501 Adjust Infrared Pyroelectric Infrared PIR Human Motion Sensor Detector Modules for Arduino Mega 2560 Nano;

For Reference:

HC-SR501 PIR motion sensor: http://osoyoo.com/2017/05/27/hc-sr501-pir-motion-sensor/

Arduino lesson - PIR Motion Sensor: http://osoyoo.com/2017/07/27/arduino-lesson-pir-motion-sensor/

Using Raspberry Pi to drive motion sensor: http://osoyoo.com/2016/07/14/motionsensor-pi/

Use Arduino to drive HC-SR501 infrared motion sensor and 2-relay: http://osoyoo.com/2016/08/15/arduino-motion-sensor/

Technical parameters: 

1.Operating voltage: DC5V to 20V

2.Static power consumption: 65 microamps

3.Level output: 3.3V, low 0V

4.Delay time: adjustable (0.3 seconds to 18 seconds)

5.Blockade Time: 0.2 seconds

6.Trigger Mode: L can not be repeated, H can be repeated default value H

7.Sensing range: less than 120 degree cone angle of less than 7 meters

8.Operating temperature: -15 to +70 degrees

9.PCB Dimensions: 32 * 24mm, screw hole distance 28mm, screw aperture 2mm, sensor lens size: (diameter): 23mm (default)

Package Included:

5 x Human Infrared Sensor Module