Specification :
Cover Material: Glass
Base Material: PP + ABS
Package Size: 15.4*15.4*16.8cm
Product Size: 4.52"*6.1"
Weight: 763g
Effective Capacity: 100ML
Time Setting: 0.5H, 1H, 2H, and 3H
Working hour: 4 hours
Power Supply: 24V
Rated Power: 12W
Vibration Frequency: 3MHz
Color: Multicolor
Standard: US Plug
How to Use:
1. Put this product on a horizontal position.
2. Lift up the cap of the humidifier, fill the water tank with purified water.
3. Add drops of aromatherapy /essential oil into the water tank.
4. Connect the humidifier to power source.
5. You can press "LIGHT" to change the color of LED light.
Package Includes:
1 x Aroma Diffuser(Oil is not included)
1 x User Manual
Caution:
*Please add organic essential oils for diffuser
*Please add water below Max line
*Please keep the lid on while working
*Please clean the diffuser at least once a week
- For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
- After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
- One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector.
- For detecting NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery, resistor and capacitor and other components, etc.
- Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. ( Use 12864 liquid crystal display with green backlight).
- After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
- Measurement results represent by TFT graphic display(160x128). Support Chinese and English.
- One key operation, Auto Power Off(Timeout Settable). Can also press the multi-functional button to close the detector.
