Product Description
Input: AC 100-240V 50/60Hz 1.5A
Output:42V 2A (Please check carefully the input voltage of your product)
Please note that:
-The charger Optimum life is 1 year
-Do not use over 12 hour per charge time
-Please charge in a ventilated environment
-Please don't cover the charger
We do our best to make every product
1 Anti interference, good safety performance, high reliability
2 High efficiency, small heat, long service life
3 With short circuit, overload, over voltage, over temperature protection
Note:The beginning of the charging temperature will be a little high, the temperature will slowly come down later, because at the beginning, which is no electricity, with the more power charge more and more, the temperature will become lower and lower.
- 【4 Protection design】1.Short circuit protection; 2.Battery polarity error protection; 3.Over current protection; 4.Over voltage protection
- 【HIGHLIGHTS】LED light clearly show the standby and charging condition.Red light means charging, green light means charge full or disconnect
- 【Feature】8 detection process, special inspection, professional equipment testing, product failure rate control in 1/1000.Faster and safer charging with our adapter,Intelligent high-speed charging for most 42V versions scooters，Please NOTICE: IT IS NOT FOR THE hoover-1 max 2.0
- 【Details】Input: 100-240VAC,50/60Hz,1.5A Output : 42V 2000mA. Maximum operation temperature <40℃.Mains supply tolerance: 100-240Vac (-10%/+10%).Diameter of the plug is about 8mm(0.31inch),the charger is not fit razor.please check your devices before order.
- 【Note】if you receive a bad item, please feel free to mail me, and i am willing to resend a new one to you. Please notice: Please confirm the 3 pins post insert correctly, If the LED light dosen't from green to red, and always green, This shows that the positive and negative connector of our charger does not correspond to the positive and negative connector of yours.Please do not overcharge. When the ligth is green, please remove the charge.
- 【4 Protection design】1.Short circuit protection; 2.Battery polarity error protection; 3.Over current protection; 4.Over voltage protection
- 【HIGHLIGHTS】LED light clearly show the standby and charging condition.Red light means charging, green light means charge full or disconnect
- 【Feature】8 detection process, special inspection, professional equipment testing, product failure rate control in 1/1000.Faster and safer charging with our adapter,Intelligent high-speed charging for most 42V versions scooters，Please NOTICE: IT IS NOT FOR THE hoover-1 max 2.0
- 【Details】Input: 100-240VAC,50/60Hz,1.5A Output : 42V 2000mA. Maximum operation temperature <40℃.Mains supply tolerance: 100-240Vac (-10%/+10%).Diameter of the plug is about 8mm(0.31inch),the charger is not fit razor.please check your devices before order.
- 【Note】if you receive a bad item, please feel free to mail me, and i am willing to resend a new one to you. Please notice: Please confirm the 3 pins post insert correctly, If the LED light dosen't from green to red, and always green, This shows that the positive and negative connector of our charger does not correspond to the positive and negative connector of yours.Please do not overcharge. When the ligth is green, please remove the charge.
