Special CNC-Machined cutouts reduce unsprung weight by up to 50% when compared to other spacers on the market.

Compatible With::
Hyundai
2009-2019 Hyundai Genesis
2002-2009 Hyundai Tiburon
2011-...

Buy Now From Amazon

Special CNC-Machined cutouts reduce unsprung weight by up to 50% when compared to other spacers on the market.

Compatible With::
Hyundai
2009-2019 Hyundai Genesis
2002-2009 Hyundai Tiburon
2011-2019 Hyundai Veloster

Mitsubishi
1986-1989 Mitsubishi Starion Turbo
1991-1999 Mitsubishi 3000gt
1989-2012 Mitsubishi Eclipse
1999-2012 Mitsubishi Galant
2003-2017 Mitsubishi Lancer (Check to make sure it has 5x114.3 bolt pattern)

Mazda
2003-2019 Mazda 3
2005-2015 Mazda 5
2002-2018 Mazda 6
1988-2002 Mazda 626
2013-2019 Mazda CX-5
2007-2012 Mazda CX-7
2006-2015 Mazda MX-5
2006-2019 Mazda MX-5 Miata
2003-2012 Mazda RX-8
1994-2003 Mazda Millenia
1999-2004 Mazda Protege
2001-2003 Mazda Protege5

1996-2010 Chrysler Sebring (Does not fit Convertible)
1991-1996 Dodge Stealth
2006-2012 Ford Fusion
1989-1999 Eagle Talon
2006-2017 Jeep Compass
2007-2017 Jeep Patriot
2007-2020 Kia Optima
2008-2019 Kia Soul

Important Notes
- This listing is for Spacers Only.

- Buyers may need to purchase extended wheel studs. Buyers are responsible for confirming their wheel studs are the proper length.
- Installation should only be performed by a trained professional.
- Make sure to get 6-8 FULL TURNS of the lug nuts when tightening.
- Be sure to torque the lug nuts to manufacturer specifications.
- Check and re-torque all lug nuts after 25-50 miles of driving.
- Failure to follow proper procedures may cause your lug nuts to come undone while driving.
- No returns or exchange once installed.

  • StanceMagic Flat Hubcentric Wheel Spacers for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 67.1mm Centerbore. Compatible with Mazda 3, 5, 6, CX-3, CX-5, MX-5 Miata, RX-8. Compatible with Hyundai Genesis, Tiburon, Veloster. Compatible with Genesis G70, G80, G90, GV70, GV80. Compatible with Mitsubishi. Compatible with Kia Optima, Stinger. Also compatible with Jeep Compass, Patriot. Check Year/Make/Model in Description. May fit others, verify using spacer specs.
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm.
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 67.1mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.
  • [PRODUCT BENEFITS] Our unique design reduces the weight of the spacers by 50% compared to other spacers on the market, which reduces unsprung weight and provides optimal performance. Hubcentric Bore fits perfectly around 67.1mm hubs to eliminate wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Reduce / Eliminate pesky wheel & fender gap.
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. May need extended bolts/studs (not included). While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY: Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Description for additional install information.
  • StanceMagic Flat Hubcentric Wheel Spacers for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 67.1mm Centerbore. Compatible with Mazda 3, 5, 6, CX-3, CX-5, MX-5 Miata, RX-8. Compatible with Hyundai Genesis, Tiburon, Veloster. Compatible with Genesis G70, G80, G90, GV70, GV80. Compatible with Mitsubishi. Compatible with Kia Optima, Stinger. Also compatible with Jeep Compass, Patriot. Check Year/Make/Model in Description. May fit others, verify using spacer specs.
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire; 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement; 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing); 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm.
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 67.1mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust.
  • [PRODUCT BENEFITS] Our unique design reduces the weight of the spacers by 50% compared to other spacers on the market, which reduces unsprung weight and provides optimal performance. Hubcentric Bore fits perfectly around 67.1mm hubs to eliminate wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Reduce / Eliminate pesky wheel & fender gap.
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. May need extended bolts/studs (not included). While installation is simple and most knowledgeable buyers can install themselves, we recommend professional installation especially if it's your first time installing auto parts. IMPORTANT SAFETY ADVISORY: Torque lug bolts/nuts to manufacturer specifications. Check and re-torque all hardware after 25-50 miles. See Description for additional install information.

Similar Products

DEWHEL Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 10X1.25 (Black)2pcs 5mm 5x114.3 Hubcentric Wheel Spacers (67.1mm Bore) Works with Hyundai Genesis Tiburon Veloster Kia Optima Soul Mazda 3 5 CX-5 CX-7 MX-5 Miata MX-6 RX-8 Millenia Protege Jeep Compass Patriot73.1mm OD to 67.1mm ID Circuit Performance Black Plastic Polycarbonate Hub Centric RingsHubcentric Rings (Pack of 4) - 67.1mm ID to 72.6mm OD - Silver Aluminum Hubrings - Only Fits 67.1mm Vehicle Hub and 72.6mm Wheel Centerbore - Compatible with Many Mitsubishi Mazda Kia HyundaiSTETION Quick Release Latch License Plate Lock Clip 1.25Circuit Performance 73.1mm OD to 67.1mm ID Silver Aluminum Hub Centric RingsHubcentric Rings (Pack of 4) - 67.1mm ID to 73.1mm OD - Black Poly Carbon Plastic Hubrings - Only Works on 67.1mm Vehicle Hubs and 73.1mm Wheel Centerbore - Works with Many Mitsubishi Mazda HyundaiCustomadeonly 2 Pieces 0.39