Light bar size: 60 Inch [1.5M].
Waterproof rating: IP65
Operating voltage: DC12-14V
Power: 22W
LED specification: 2835SMD [0.2W is  much brighter than 3528]
Lamp beads number: 108lights (white 36 beads + red 72beads)
Product features: daytime running lights, reversing lights, left and right turn lights, brake lights.
Work mode: Reversing light (or daytime running light) - white highlights; brake lights - all red light half; left turn signal - red light on the left full; right turn signal - right red light.
Lampholder interface: standard 4PIN connector. [plug and play, no need to change any lines]
Power cord length: 110CM [With insurance tube]
Application: It can be used for the safety warning light belt of the tailgate of the pick-up truck, and can also be customized for vehicles of different lengths and other specifications.
Package List:
1 * Pcs LED Truck Tailgate Strip Light
1 * Instructions
2*Screws+Fastener
Note: Strips can be cut, but it's not recommendable and don't stress the cables or bent too much. When you try to open the headlight to install them, you must be careful!
So now starting you wonderful truckï¼
- 2835LEDs High brightness[White+Red], start instant, low power consumption, long service.
- LED strip control circuit is not easy to oxidation, the maximum load current of 0.1A.
- Easy installation. Clean the car trunk box and attach the LED strip on the trunk side. It can be connected to the ACC circuit of car.
- We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need,Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
- There are no instructions included in this kit.Professional Installation Is Highly Recommended. we have 1-yr wty if have any qestions please contact us. if you need like this items in higher waterproof grade(IP68) you can search ASIN:B07DJBS49Q on Amazon.
- 2835LEDs High brightness[White+Red], start instant, low power consumption, long service.
- LED strip control circuit is not easy to oxidation, the maximum load current of 0.1A.
- Easy installation. Clean the car trunk box and attach the LED strip on the trunk side. It can be connected to the ACC circuit of car.
- We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need,Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
- There are no instructions included in this kit.Professional Installation Is Highly Recommended. we have 1-yr wty if have any qestions please contact us. if you need like this items in higher waterproof grade(IP68) you can search ASIN:B07DJBS49Q on Amazon.