Zorvo 3d Printer Hot End Metal V6 J-Head Hotend Extruder for RepRap 3d Printer Extruder Parts1.75mm Filament, Direct Feed or Bowden 0.4mm Nozzle, 12V fan, and 3ft PTFE Bowden Tube;

Description:
●With PTFE in hot regions of our HotEnd we can reach 230C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 230C.
●This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
●Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 230C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.

NTC 3950 Thermistor parameters:
â–ºThermistor temperature value table for Marlin
â–ºSmall Size: 1.25mmx2.0mm glass bead
â–ºHigh accuracy: 1%
►Resistance value at 25°C=100K
â–ºWiring insulation: high temperature teflon/PTFE
â–ºWiring length: 1 meter

Specification:
â–ºType: Bowden V6 J-head
â–ºThermister: 100K NTC

Package include:
â–º1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor.
â–º1 x Heatsink Shroud with High Speed Fan 3010 12V 0.13A
â–º1 x One Meter long Bowden tubing 4mm OD 2mm ID
â–º1 x PC4-M6 Straight Fitting