Note:
Upon receiving the item, it's recommended to fully charge the unit before using it.
Charge battery at least once every 3 months to avoid shortening its lifespan.
Press the on/off button for over 3 seconds to turn on the flashlight.
The 12v port only works for car application. It won't work for cameras or other small electronic devices.
Specification:
Batter Type: Li-Polymer
Capacity: 12000mAh
Input: DC 12V 1A
Output: 5V/2。4A(2 Ports)
Car jump Output: 12V
Start Current:250A
Peak Current :500A
Applicable temperature range: 0℃~85℃
ATTENTION:
Don't jump start any engine that exceed the maximum displacement the unit can bear, or it will cause serous damages to the unit
Your jump starter will perform best when its battery is fully charged
Don't connect the positive and negative polarity together when it's power on
Don't crank the engine for more than 4 seconds. Allow the jumpstarter to cool down for at least 30 seconds after each jump-start
Package Including:
1 x 12000mAh Nekteck Car Jump Starter
1 x Car Charger
1 x Micro USB Cable
1 x Jumper Cable with Battery Clamps
1 x User Manual
1 x Portable Carrying bag
Retail Packaging